Plötzlicher reboot beim Aufruf "Meine Aufnahmen"

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Gehe ich hier einfach wie bei einer Neuinstall vor Bspw. DB VTi 13.0.3 Download > dir auf USB > USB in der VTi?
      es ist doch ein Neuinstall - also wie sonst?

      wenn es an der hdd liegt, wirst sowieso deine Filme umkopieren und die Platte formatieren müssen, bzw. mal einen Test per gerätemanager mind. falls noch nicht geschehen

      Nachtrag - wichtig!
      nach dem Einrichtassistenten sofort VTi aktualisieren!
      ============================================================================================

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von shadowrider ()

    • Ich bin soweit mit der Neuinstall durch (Habe ab der Abfrage des Transparaenzeffekt die Ersteinrichtung beendet und direkt die Updates geladen). Läuft soweit stabil und vielleicht etwas flotter.

      Nun noch die Frage zur HDD:

      Ja, ein Test wurde bereits durchgeführt. Da war alles jut.

      Nun, kann ich die Daten, also die HDD mittels des USB 3.0 Kabels am Desktop-PC anschließen und so ein "Notfallbackup" kopieren? Mir ist klar das dass natürlich möglich ist, ich möchte nur nichts am filesystem durcheinanderbringen.

      Oder wäre es auch OHNE Formatierung möglich, die HDD über den Gerätemanager einzubinden?
      (Die HDD wurde inzwischen ausgeschlossen, da dass gleiche Fehlerbild beim USB-Stick und mitten im Betrieb auftrat - paar Posts weiter zurück).

      Ich danke euch und hoffe dann Ruckelfrei aufnehmen zu können :).


      LG
      - brendy -
    • Das hat soweit geklappt!
      Die HDD ließ sich ohne Format als ext4 unter /media/hdd/ einbinden.

      Nächstes Problem mit dem HDD übertrag:

      Wenn ich "Meine Aufnahmen" aufrufe, so erscheinen alle Listings normal, spiele ich etwas ab <5 Tage so ist jegliche Wiedergabe ohne Bild und Ton. Woran kann dass liegen? SQL-DB deaktivieren?

      Nachtrag folgt in wenigen Stunden wenn ein paar Aufnahmen fertig sind, vom Timeshift sieht es aber wieder perfekt aus (Keine Permanente Ton/Bild Artefakte) ;).


      Habt besten dank!!!


      LG
      - brendy -
    • Genau, beim Abspielen sind "ALLE" ohne Bild/Ton.
      Die Größe wird ganz normal neben den anderen details angezeigt x,x GB.

      Ich denke auch dass Sie nicht Entschlüsselt wurden. Die "Kurzinfos" sind bisher noch nicht aufgeploppt. Wie kann ich die Entschlüsselung herbeiführen?

      Was mich aktuell irritiert, ich habe gerade zum Test einfach mal eine Aufnahme vom FTP der VU+ geladen, läuft im VLC ohne Probleme oO.

      Vielen dank für eure Mithilfe! Ich weiß dies wirklich zu schätzen!


      LG
      - brendy -
    • 5 Tage später wirst wohl nichts mehr entschüsseln können


      Was mich aktuell irritiert, ich habe gerade zum Test einfach mal eine Aufnahme vom FTP der VU+ geladen
      die gleiche, die an der Box schwarz bleibt?
      würde zuerst mal alles von der Platte wegsichern wollen...

      obwohl, wenn es alle betrifft ?(
      ============================================================================================

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von shadowrider ()

    • Hallo ihr lieben,

      das Thema macht mich erlich gesagt ganz schön "bedröppelt" mittlerweile.
      Als ich gerad dabei war die Settings zu setzen, u.a. gerade auch die Debug Ausgabe aktiv > GS während eines gewollten GUI neustarts ...

      wussaa

      Ich weiß nicht in wie weit die Crashlogs Aussage darüber gaben. Ist es ein vorübergehendes SW-Problem? Ist die Mühle tatsächlich so schnell "Defekt"?

      Ich weiß es selbst nicht ...

      Freue mich auf eure Anmerkungen wie ihr weiter ansetzen würdet!


      LG!
      - brendy -

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von brendy ()

    • Im Zeitraum von Montag bis dato (heute / Donnerstag) ist sie insgesamt 2x im Debug neugestartet.
      Ich habe irgendwie das Gefühl das es Zeitweise am Image lag, ich möchte mich da aber nicht aus dem Fenster lehnen ...

      Über die Aussagen, was die Debuglogs für euch her geben, wie ich nun weiter verfahren soll, keine Ahnung.

      Sollte sich das Häufen werde ich die VU+ in die RMA geben. Sollte ich nach dem Fehlerbild was sich hier seigt(e) direkt eine RMA einleiten?

      Bitte gibt mir eine Anregung wie Ihr so weiter verfahren würdet!

      Lieben herzlichen dank!!!


      Gruß
      - brendy -
    • Kann mir denn zumindest jemand die Aussage geben, ob es normal ist, dass sich im "/media/hdd/movie" rund alle 3 Tage eine Crashlog bildet, bzw. vom Zeitstempel besteht?

      Ich muss endlich wissen ob ich die VU in die Retoure zum Austausch geben muss ... Aufnahmemedien wurden ebenso v.a. ausgeschlossen.

      Lieben Dank!!!


      Gruß
      - brendy -
    • Lieben Dank @dg4sj,

      ich habe im Verlauf mehrmals die Crashlogs, wie auch jetzt dem Dateianhang beigefügt und nachträglich gefragt welcher Schlussfolgen sich entnehmen lassen.

      Würde mich sehr über eine Auswertung freuen!


      LG
      - brendy -
      Dateien

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von brendy ()

    • Tja, der Crash passiert im nur den VTi-Entwicklern einsehbaren Code; seitdem VTi so vieles in closed source verpackt hat, kann Hilfe dann auch nur von diesem sehr kleinen Personenkreis kommen. Musst wohl warten, bis sich jemand das angesehen hat. Was ich ausserdem sehr unglücklich finde: eine Nachricht darüber, dass das passiert, habe ich auch fast noch nie gesehen.

      Hat alles seine Vor- und Nachteile...

      Ich habe an anderer Stelle schon mal gesagt, dass ich es gut fände, für so etwas einen Issue-Tracker einzusetzen. Mehr Transparenz führt oft zu mehr Verständnis und weniger Unmut.
      Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.
    • Nichts wildes, Gecraqut hat es u.a. auch beim Timer setzen & entfernen, Zappen, ganz gewöhnliche Sachen wie das EPG durchzugehen.

      Ich hoffe ich konnte auf deinen letzten Satz damit eingehen, den habe ich nicht ganz verstanden, sorry ;).

      Hab besten dank für eure Feedbacks!!!


      LG
      - brendy -
    • Leider gerade wieder "spontan" im Debug rebootet. Habe dabei, als die Platte Inaktiv war das USB 3.1 gegen ein kürzeres getauscht mehr nicht.
      Nachdem die VU+ oben war habe ich direkt den Befehl in der Shell eingegeben. Zwischen Debug + reboot + Befehlsausgabe unter 10 Sekunden.

      Anbei:

      Quellcode

      1. root@vuuno4k:~# dmesg
      2. [ 0.000000] Booting Linux on physical CPU 0x0
      3. [ 0.000000] Linux version 3.14.28-1.12 (plnick@build-plnick) (gcc version 4.9 .2 (GCC) ) #1 SMP Fri Mar 2 20:28:56 CET 2018
      4. [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
      5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
      6. [ 0.000000] Machine model: UNO4K
      7. [ 0.000000] moving dtb from 0x0000000007628000 to 0x000000000086889c
      8. [ 0.000000] bmem: Reserved 637 MiB at 0x0000000017f00000
      9. [ 0.000000] bmem: Reserved 637 MiB at 0x0000000097f00000
      10. [ 0.000000] cma: Reserved 16 MiB at 0x0000000016400000
      11. [ 0.000000] Memory policy: Data cache writealloc
      12. [ 0.000000] On node 0 totalpages: 524288
      13. [ 0.000000] Normal zone: 750 pages used for memmap
      14. [ 0.000000] Normal zone: 0 pages reserved
      15. [ 0.000000] Normal zone: 96000 pages, LIFO batch:31
      16. [ 0.000000] HighMem zone: 3346 pages used for memmap
      17. [ 0.000000] HighMem zone: 428288 pages, LIFO batch:31
      18. [ 0.000000] MCP: Enabling write pairing
      19. [ 0.000000] PERCPU: Embedded 8 pages/cpu @d75bd000 s8896 r8192 d15680 u32768
      20. [ 0.000000] pcpu-alloc: s8896 r8192 d15680 u32768 alloc=8*4096
      21. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
      22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 523538
      23. [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflag s=data=journal rootwait rw coherent_pool=2M vmalloc=633m bmem=637m@383m bmem=637 m@2431m
      24. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
      25. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
      26. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
      27. [ 0.000000] Memory: 742300K/2097152K available (5886K kernel code, 323K rwdat a, 1916K rodata, 252K init, 190K bss, 1338468K reserved, 16384K cma-reserved, 40 0376K highmem)
      28. [ 0.000000] Virtual kernel memory layout:
      29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
      30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
      31. [ 0.000000] vmalloc : 0xd7800000 - 0xff000000 ( 632 MB)
      32. [ 0.000000] lowmem : 0xc0000000 - 0xd7700000 ( 375 MB)
      33. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
      34. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      35. [ 0.000000] .text : 0xc0008000 - 0xc07a6d80 (7804 kB)
      36. [ 0.000000] .init : 0xc07a7000 - 0xc07e62c0 ( 253 kB)
      37. [ 0.000000] .data : 0xc07e8000 - 0xc0838d40 ( 324 kB)
      38. [ 0.000000] .bss : 0xc0838d48 - 0xc086889c ( 191 kB)
      39. [ 0.000000] Hierarchical RCU implementation.
      40. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
      41. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
      42. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
      43. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
      44. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
      45. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
      46. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
      47. [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
      48. [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 25451 65795328ns
      49. [ 0.000010] Switching to timer-based delay loop
      50. [ 0.000239] Calibrating delay loop (skipped), value calculated using timer fr equency.. 54.00 BogoMIPS (lpj=27000)
      51. [ 0.000248] pid_max: default: 32768 minimum: 301
      52. [ 0.000342] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
      53. [ 0.000348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
      54. [ 0.006087] CPU: Testing write buffer coherency: ok
      55. [ 0.006279] CPU0: update cpu_power 1024
      56. [ 0.006285] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
      57. [ 0.006455] Setting up static identity map for 0x59aed0 - 0x59af28
      58. [ 0.008800] CPU1: Booted secondary processor
      59. [ 0.008823] CPU1: update cpu_power 1024
      60. [ 0.008826] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
      61. [ 0.008897] Brought up 2 CPUs
      62. [ 0.008908] SMP: Total of 2 processors activated.
      63. [ 0.008912] CPU: All CPU(s) started in SVC mode.
      64. [ 0.009307] devtmpfs: initialized
      65. [ 0.012561] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
      66. [ 0.013566] regulator-dummy: no parameters
      67. [ 0.013767] NET: Registered protocol family 16
      68. [ 0.014623] DMA: preallocated 2048 KiB pool for atomic coherent allocations
      69. [ 0.015271] cpuidle: using governor ladder
      70. [ 0.015277] cpuidle: using governor menu
      71. [ 0.017808] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
      72. [ 0.017947] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
      73. [ 0.021052] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
      74. [ 0.021329] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] regist ered
      75. [ 0.021476] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] regist ered
      76. [ 0.021614] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] regist ered
      77. [ 0.021747] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] regist ered
      78. [ 0.021880] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] regist ered
      79. [ 0.022041] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] regist ered
      80. [ 0.022184] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] regist ered
      81. [ 0.022317] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] regist ered
      82. [ 0.022444] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] regist ered
      83. [ 0.022573] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] regist ered
      84. [ 0.022702] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] regist ered
      85. [ 0.022833] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] regist ered
      86. [ 0.023470] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
      87. [ 0.023967] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] regist ered
      88. [ 0.024104] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] regist ered
      89. [ 0.024389] No ATAGs?
      90. [ 0.024407] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
      91. [ 0.024412] hw-breakpoint: maximum watchpoint size is 8 bytes.
      92. [ 0.024579] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
      93. [ 0.038336] bio: create slab <bio-0> at 0
      94. [ 0.039011] SCSI subsystem initialized
      95. [ 0.039211] libata version 3.00 loaded.
      96. [ 0.039597] usbcore: registered new interface driver usbfs
      97. [ 0.039668] usbcore: registered new interface driver hub
      98. [ 0.039761] usbcore: registered new device driver usb
      99. [ 0.039882] Linux video capture interface: v2.00
      100. [ 0.040097] pps_core: LinuxPPS API ver. 1 registered
      101. [ 0.040102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
      102. [ 0.040156] PTP clock support registered
      103. [ 0.040698] Advanced Linux Sound Architecture Driver Initialized.
      104. [ 0.041691] cfg80211: Calling CRDA to update world regulatory domain
      105. [ 0.042158] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
      106. [ 0.042350] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
      107. [ 0.142668] brcm-pci f0460000.pcie: link down
      108. [ 0.242842] brcm-pci f0490000.pcie: link down
      109. [ 0.242888] Switched to clocksource arch_sys_counter
      110. [ 0.243069] FS-Cache: Loaded
      111. [ 0.244656] thermal thermal_zone0: failed to read out thermal zone 0
      112. [ 0.244730] NET: Registered protocol family 2
      113. [ 0.245149] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
      114. [ 0.245170] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
      115. [ 0.245208] TCP: Hash tables configured (established 4096 bind 4096)
      116. [ 0.245239] TCP: reno registered
      117. [ 0.245245] UDP hash table entries: 256 (order: 1, 8192 bytes)
      118. [ 0.245256] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
      119. [ 0.245358] NET: Registered protocol family 1
      120. [ 0.245545] RPC: Registered named UNIX socket transport module.
      121. [ 0.245552] RPC: Registered udp transport module.
      122. [ 0.245555] RPC: Registered tcp transport module.
      123. [ 0.245558] RPC: Registered tcp NFSv4.1 backchannel transport module.
      124. [ 0.245563] PCI: CLS 0 bytes, default 64
      125. [ 0.245798] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counte rs available
      126. [ 0.246862] futex hash table entries: 512 (order: 3, 32768 bytes)
      127. [ 0.247540] bounce pool size: 64 pages
      128. [ 0.248086] NFS: Registering the id_resolver key type
      129. [ 0.248111] Key type id_resolver registered
      130. [ 0.248115] Key type id_legacy registered
      131. [ 0.248124] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      132. [ 0.248128] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      133. [ 0.248495] msgmni has been set to 699
      134. [ 0.249189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
      135. [ 0.249196] io scheduler noop registered
      136. [ 0.249200] io scheduler deadline registered
      137. [ 0.249216] io scheduler cfq registered (default)
      138. [ 0.249430] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
      139. [ 0.265452] brcm-waketimer f0417580.waketimer: registered, with irq 260
      140. [ 0.265750] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      141. [ 0.267057] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
      142. [ 1.049721] console [ttyS0] enabled
      143. [ 1.053608] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
      144. [ 1.062927] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
      145. [ 1.075108] loop: module loaded
      146. [ 1.078857] ahci brcmstb-ahci.0: can't get clock
      147. [ 1.083572] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
      148. [ 1.100903] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 i mpl platform mode
      149. [ 1.109533] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum p art
      150. [ 1.119012] scsi0 : ahci_platform
      151. [ 1.122666] scsi1 : ahci_platform
      152. [ 1.126209] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 00 irq 91
      153. [ 1.134143] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1 80 irq 91
      154. [ 1.143350] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
      155. [ 1.149749] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
      156. [ 1.157072] m25p80 spi32766.0: found mx25l3255e, expected m25p80
      157. [ 1.163110] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
      158. [ 1.168367] 5 ofpart partitions found on MTD device spi32766.0
      159. [ 1.174210] Creating 5 MTD partitions on "spi32766.0":
      160. [ 1.179362] 0x000000000000-0x000000200000 : "flash0.bolt"
      161. [ 1.185463] 0x000000200000-0x000000210000 : "flash0.macadr"
      162. [ 1.191655] 0x000000210000-0x000000220000 : "flash0.nvram"
      163. [ 1.197750] 0x000000220000-0x000000230000 : "flash0.devtree"
      164. [ 1.204039] 0x000000000000-0x000000400000 : "flash0"
      165. [ 1.210663] libphy: Fixed MDIO Bus: probed
      166. [ 1.215462] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
      167. [ 1.231896] libphy: bcmgenet MII bus: probed
      168. [ 1.251901] ata1: SATA link down (SStatus 0 SControl 300)
      169. [ 1.257374] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
      170. [ 1.263226] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
      171. [ 1.269681] xhci-brcm: xHCI BRCM driver
      172. [ 1.273620] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      173. [ 1.279445] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
      174. [ 1.287544] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
      175. [ 1.294279] hub 1-0:1.0: USB hub found
      176. [ 1.298064] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
      177. [ 1.305320] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      178. [ 1.311139] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
      179. [ 1.319461] hub 2-0:1.0: USB hub found
      180. [ 1.323239] hub 2-0:1.0: 2 ports detected
      181. [ 1.327628] ehci-brcm: EHCI BRCM driver
      182. [ 1.331569] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
      183. [ 1.337401] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
      184. [ 1.355366] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
      185. [ 1.366897] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
      186. [ 1.373569] hub 3-0:1.0: USB hub found
      187. [ 1.377348] hub 3-0:1.0: 1 port detected
      188. [ 1.381486] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
      189. [ 1.383901] ata2: SATA link down (SStatus 0 SControl 300)
      190. [ 1.392736] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
      191. [ 1.410696] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
      192. [ 1.422895] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
      193. [ 1.429631] hub 4-0:1.0: USB hub found
      194. [ 1.433408] hub 4-0:1.0: 1 port detected
      195. [ 1.437651] ohci-brcm: OHCI BRCM driver
      196. [ 1.441576] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
      197. [ 1.447394] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
      198. [ 1.455274] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
      199. [ 1.516381] hub 5-0:1.0: USB hub found
      200. [ 1.520158] hub 5-0:1.0: 1 port detected
      201. [ 1.524287] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
      202. [ 1.530117] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
      203. [ 1.538001] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
      204. [ 1.599379] hub 6-0:1.0: USB hub found
      205. [ 1.603156] hub 6-0:1.0: 1 port detected
      206. [ 1.607398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      207. [ 1.613946] ehci-pci: EHCI PCI platform driver
      208. [ 1.618487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      209. [ 1.624687] ohci-pci: OHCI PCI platform driver
      210. [ 1.629418] usbcore: registered new interface driver usb-storage
      211. [ 1.635600] mousedev: PS/2 mouse device common for all mice
      212. [ 1.641577] i2c /dev entries driver
      213. [ 1.645432] IR NEC protocol handler initialized
      214. [ 1.650000] IR RC5(x) protocol handler initialized
      215. [ 1.650007] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
      216. [ 1.661439] IR RC6 protocol handler initialized
      217. [ 1.665994] IR JVC protocol handler initialized
      218. [ 1.670539] IR Sony protocol handler initialized
      219. [ 1.675179] IR RC5 (streamzap) protocol handler initialized
      220. [ 1.675184] usb 2-2: Parent hub missing LPM exit latency info. Power managem ent will be impacted.
      221. [ 1.689739] IR SANYO protocol handler initialized
      222. [ 1.694467] IR MCE Keyboard/mouse protocol handler initialized
      223. [ 1.700780] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d river
      224. [ 1.708831] cpufreq_cpu0: failed to get cpu0 regulator: -19
      225. [ 1.714671] usb-storage 2-2:1.0: USB Mass Storage device detected
      226. [ 1.721019] scsi2 : usb-storage 2-2:1.0
      227. [ 1.724949] sdhci: Secure Digital Host Controller Interface driver
      228. [ 1.731145] sdhci: Copyright(c) Pierre Ossman
      229. [ 1.735512] sdhci-pltfm: SDHCI platform and OF driver helper
      230. [ 1.742332] mmc0: no vqmmc regulator found
      231. [ 1.746439] mmc0: no vmmc regulator found
      232. [ 1.780897] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A DMA
      233. [ 1.790760] usbcore: registered new interface driver usbhid
      234. [ 1.798359] usbhid: USB HID core driver
      235. [ 1.802842] TCP: cubic registered
      236. [ 1.806183] NET: Registered protocol family 17
      237. [ 1.810872] Key type dns_resolver registered
      238. [ 1.817256] Registering SWP/SWPB emulation handler
      239. [ 1.826459] regulator-dummy: disabling
      240. [ 1.836694] ALSA device list:
      241. [ 1.839703] No soundcards found.
      242. [ 1.843328] Waiting for root device /dev/mmcblk0p4...
      243. [ 1.878533] mmc0: BKOPS_EN bit is not set
      244. [ 1.888769] mmc0: new high speed MMC card at address 0001
      245. [ 1.894518] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
      246. [ 1.899152] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
      247. [ 1.905166] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
      248. [ 1.911176] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
      249. [ 1.921524] mmcblk0: p1 p2 p3 p4
      250. [ 1.927550] mmcblk0boot1: unknown partition table
      251. [ 1.933054] mmcblk0boot0: unknown partition table
      252. [ 1.949329] EXT4-fs: Warning: mounting with data=journal disables delayed all ocation and O_DIRECT support!
      253. [ 1.964686] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode . Opts: data=journal
      254. [ 1.973605] VFS: Mounted root (ext4 filesystem) on device 179:4.
      255. [ 1.980381] devtmpfs: mounted
      256. [ 1.983460] Freeing unused kernel memory: 252K (c07a7000 - c07e6000)
      257. [ 2.147392] udevd[643]: starting version 182
      258. [ 2.297126] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
      259. [ 2.322662] random: nonblocking pool is initialized
      260. [ 2.519532] procmk_init
      261. [ 2.522583] bcm_event: module license 'Proprietary' taints kernel.
      262. [ 2.522591] Disabling lock debugging due to kernel taint
      263. [ 3.494623] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ : 0 ANSI: 6
      264. [ 3.497479] sd 2:0:0:0: Attached scsi generic sg0 type 0
      265. [ 3.500225] sd 2:0:0:0: [sda] 3907029164 512-byte logical blocks: (2.00 TB/1. 81 TiB)
      266. [ 3.501425] sd 2:0:0:0: [sda] Write Protect is off
      267. [ 3.501433] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
      268. [ 3.502338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
      269. [ 3.513198] sda: sda1
      270. [ 3.518785] sd 2:0:0:0: [sda] Attached SCSI disk
      271. [ 5.804105] DVB: registering new adapter (_vuplus_uno4k_)
      272. [ 6.035966] bcm7252s: hotplug_callback():
      273. [ 6.035966] Hotplug - status.connected 1:0:1
      274. [ 6.035982] bcm7252s: hotplug_callback():
      275. [ 6.035982] Hotplug - connecting HDMI to display 0xe
      276. [ 6.237892] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      277. [ 6.259931] [MPVR]: >> misc_pvr_init
      278. [ 6.261321] [VID]: 6bcm7335_video_init
      279. [ 6.321941] [AUD]: 6bcm7335_audio_init
      280. [ 6.322138] [AUD]: >> bcm_audio_capture_init
      281. [ 6.324915] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4918 800 state=d371d000 config=bf6b3298
      282. [ 6.324929] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      283. [ 6.325068] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4918 400 state=d3093800 config=bf6b32a0
      284. [ 6.325078] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      285. [ 6.325194] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4918 000 state=d3093000 config=bf6b32a8
      286. [ 6.325205] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      287. [ 6.325330] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4916 800 state=d3096800 config=bf6b32b0
      288. [ 6.325337] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      289. [ 6.325470] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4913 400 state=d3096000 config=bf6b32b8
      290. [ 6.325481] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      291. [ 6.325587] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4907 800 state=d3098800 config=bf6b32c0
      292. [ 6.325594] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      293. [ 6.325691] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4913 800 state=d3098000 config=bf6b32c8
      294. [ 6.325698] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      295. [ 6.325810] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0 handle=d4913 c00 state=d309a800 config=bf6b32d0
      296. [ 6.325817] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE) ...
      297. [ 6.325942] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
      298. [ 6.342783] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      299. [ 6.343982] BKNI_Malloc(linuxkernel) top users:
      300. [ 6.343982] blocks, bytes, filename:line
      301. [ 6.343991] 1119, 239172, BSEAV/lib/utils/balloc.c:31
      302. [ 6.363154] input: dreambox advanced remote control (native) as /devices/virt ual/input/input0
      303. [ 6.366105] [LCD]: registered
      304. [ 6.368944] [CI]: registered ci0
      305. [ 6.373166] [CI]: CI interface initialised
      306. [ 6.373166]
      307. [ 6.379934] [DFP]: registered dbox fp
      308. [ 6.383266] [SC]: registered sci0
      309. [ 7.824893] system_time_set wakeup mode get
      310. [ 7.884891] system_time_set wakeup mode get 0xc3
      311. [ 8.209691] [VID]: VIDEO_SET_STREAMTYPE 0
      312. [ 8.209702] [VID]: VIDEO_SELECT_SOURCE 1 0
      313. [ 8.209749] [VID]: VIDEO_PLAY 1 2 0
      314. [ 8.216018] [VID]: VIDEO_CONTINUE 1 1
      315. [ 8.216031] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      316. [ 8.329902] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat ch: 1
      317. [ 8.333632] f0b00000.ethernet: configuring instance for internal PHY
      318. [ 8.489349] [VID]: VIDEO_STOP 0 1
      319. [ 8.490251] [VID]: VIDEO_SELECT_SOURCE 0 0
      320. [ 10.334001] libphy: f0b00000.etherne:01 - Link is Down
      321. [ 12.181498] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
      322. [ 14.407832] NET: Registered protocol family 10
      323. [ 14.814138] [VID]: VIDEO_SET_STREAMTYPE 0
      324. [ 14.814164] [VID]: VIDEO_SELECT_SOURCE 1 0
      325. [ 14.814211] [VID]: VIDEO_PLAY 1 2 0
      326. [ 14.819484] [VID]: VIDEO_CONTINUE 1 1
      327. [ 14.819492] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      328. [ 15.093401] [VID]: VIDEO_STOP 0 1
      329. [ 15.094324] [VID]: VIDEO_SELECT_SOURCE 0 0
      330. [ 17.706607] [VID]: VIDEO_SET_STREAMTYPE 0
      331. [ 17.706622] [VID]: VIDEO_SELECT_SOURCE 1 0
      332. [ 17.706668] [VID]: VIDEO_PLAY 1 2 0
      333. [ 17.712003] [VID]: VIDEO_CONTINUE 1 1
      334. [ 17.712013] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      335. [ 17.986175] [VID]: VIDEO_STOP 0 1
      336. [ 17.987097] [VID]: VIDEO_SELECT_SOURCE 0 0
      337. [ 23.228322] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      338. [ 23.316351] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      339. [ 23.397543] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      340. [ 23.482467] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      341. [ 24.417528] [AUD]: AUDIO_SET_MUTE 0
      342. [ 24.418050] [AUD]: AUDIO_SET_MIXER -740417912
      343. [ 24.418064] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      344. [ 24.418071] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      345. [ 24.418078] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      346. [ 24.496520] [AUD]: AUDIO_SET_MIXER -740417912
      347. [ 24.496535] [AUD]: AUDIO_SET_MIXER : amixl 16, amixr 16
      348. [ 24.496540] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      349. [ 24.496543] [AUD]: AUDIO_SET_MIXER : next left volume -1212, right volume -12 12
      350. [ 24.852360] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
      351. [ 25.151170] [AUD]: AUDIO_SET_MUTE 1
      352. [ 25.438491] FE tune
      353. [ 27.612071] [AUD]: AUDIO_SELECT_SOURCE 0
      354. [ 27.612132] [AUD]: AUDIO_SET_BYPASS_MODE 0
      355. [ 27.612138] [AUD]: AC3 downmix 0 state : 0
      356. [ 27.612150] [AUD]: AUDIO_PAUSE -263930880
      357. [ 27.612159] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      358. [ 27.616688] [VID]: VIDEO_SELECT_SOURCE 0 0
      359. [ 27.618416] [VID]: VIDEO_SLOWMOTION 0 0
      360. [ 27.618451] [VID]: VIDEO_FAST_FORWARD 0 0 0
      361. [ 27.618470] [VID]: VIDEO_CONTINUE -263930880 0
      362. [ 27.618490] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd3fbc680
      363. [ 27.618495] [AUD]: Mute : 1
      364. [ 27.618636] [AUD]: AUDIO_CHANNEL_SELECT 0
      365. [ 30.554323] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      366. [ 30.554333] [VID]: VIDEO_GET_SIZE aspect: 1 0
      367. [ 30.854168] FE tune
      368. [ 76.626575] [AUD]: AUDIO_STOP -263930880
      369. [ 76.651293] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      370. [ 76.651301] [AUD]: AUDIO_CONTINUE aph=0 0 0
      371. [ 76.665614] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      372. [ 76.672957] [AUD]: AUDIO_SELECT_SOURCE 0
      373. [ 76.673090] [AUD]: AUDIO_SET_BYPASS_MODE 0
      374. [ 76.673097] [AUD]: AC3 downmix 0 state : 0
      375. [ 76.673109] [AUD]: AUDIO_PAUSE -263930880
      376. [ 76.673119] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      377. [ 76.675271] [VID]: VIDEO_SELECT_SOURCE 0 1
      378. [ 76.675349] [VID]: VIDEO_SET_STREAMTYPE 1
      379. [ 76.675538] [VID]: VIDEO_FREEZE -263930880 1
      380. [ 78.474979] [VID]: VIDEO_PLAY -263930880 5 2
      381. [ 78.480117] [VID]: VIDEO_SLOWMOTION 0 1
      382. [ 78.480148] [VID]: VIDEO_FAST_FORWARD 0 1 0
      383. [ 78.480171] [VID]: VIDEO_CONTINUE -263930880 1
      384. [ 78.480184] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd3fbc680
      385. [ 78.480188] [AUD]: Mute : 0
      386. [ 78.507185] [AUD]: AUDIO_CLEAR_BUFFER 1 0
      387. [ 78.518568] [VID]: VIDEO_CLEAR_BUFFER -263930880 1 1
      388. [ 78.540968] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      389. [ 78.540976] [VID]: VIDEO_GET_SIZE aspect: 1 0
      390. [ 78.648675] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      391. [ 78.656954] [VID]: VIDEO_SLOWMOTION 0 1
      392. [ 78.657072] [VID]: VIDEO_FAST_FORWARD 0 1 0
      393. [ 78.657173] [VID]: VIDEO_CONTINUE -263930880 1
      394. [ 78.657207] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd3fbc680
      395. [ 78.657219] [AUD]: Mute : 0
      396. [ 88.039356] [VID]: VIDEO_STOP 1 1
      397. [ 88.039420] [AUD]: AUDIO_STOP -263930880
      398. [ 88.065959] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      399. [ 88.065969] [AUD]: AUDIO_CONTINUE aph=0 0 0
      400. [ 88.227303] FE tune
      401. [ 88.415261] [AUD]: AUDIO_SELECT_SOURCE 0
      402. [ 88.415317] [AUD]: AUDIO_SET_BYPASS_MODE 0
      403. [ 88.415323] [AUD]: AC3 downmix 0 state : 0
      404. [ 88.415334] [AUD]: AUDIO_PAUSE -263930880
      405. [ 88.415343] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      406. [ 88.417056] [VID]: VIDEO_SELECT_SOURCE 0 0
      407. [ 88.418549] [VID]: VIDEO_SLOWMOTION 0 0
      408. [ 88.418576] [VID]: VIDEO_FAST_FORWARD 0 0 0
      409. [ 88.418589] [VID]: VIDEO_CONTINUE -263930880 0
      410. [ 88.418602] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd28bd200
      411. [ 88.418606] [AUD]: Mute : 0
      412. [ 89.422342] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      413. [ 89.422353] [VID]: VIDEO_GET_SIZE aspect: 1 0
      414. [ 103.504673] [AUD]: AUDIO_STOP -263930880
      415. [ 103.530078] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      416. [ 103.530086] [AUD]: AUDIO_CONTINUE aph=0 0 0
      417. [ 103.551067] FE tune
      418. [ 103.740854] [AUD]: AUDIO_SELECT_SOURCE 0
      419. [ 103.740962] [AUD]: AUDIO_SET_BYPASS_MODE 1
      420. [ 103.740974] [AUD]: downmix 0 state : 0
      421. [ 103.741102] [AUD]: AUDIO_PAUSE -263930880
      422. [ 103.741121] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      423. [ 103.742921] [VID]: VIDEO_SELECT_SOURCE 0 1
      424. [ 103.744905] [VID]: VIDEO_SLOWMOTION 0 1
      425. [ 103.744971] [VID]: VIDEO_FAST_FORWARD 0 1 0
      426. [ 103.744997] [VID]: VIDEO_CONTINUE -263930880 1
      427. [ 103.745013] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd2a03580
      428. [ 103.745018] [AUD]: Mute : 0
      429. [ 109.787368] [AUD]: AUDIO_STOP -263930880
      430. [ 109.811118] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      431. [ 109.811125] [AUD]: AUDIO_CONTINUE aph=0 0 0
      432. [ 109.832249] FE tune
      433. [ 110.022644] [AUD]: AUDIO_SELECT_SOURCE 0
      434. [ 110.022698] [AUD]: AUDIO_SET_BYPASS_MODE 0
      435. [ 110.022705] [AUD]: AC3 downmix 0 state : 0
      436. [ 110.022716] [AUD]: AUDIO_PAUSE -263930880
      437. [ 110.022725] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      438. [ 110.024515] [VID]: VIDEO_SELECT_SOURCE 0 1
      439. [ 110.026445] [VID]: VIDEO_SLOWMOTION 0 1
      440. [ 110.026505] [VID]: VIDEO_FAST_FORWARD 0 1 0
      441. [ 110.026529] [VID]: VIDEO_CONTINUE -263930880 1
      442. [ 110.026544] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd3fbc680
      443. [ 110.026548] [AUD]: Mute : 0
      444. [ 111.030214] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      445. [ 111.030223] [VID]: VIDEO_GET_SIZE aspect: 1 0
      446. [ 124.612681] [AUD]: AUDIO_STOP -263930880
      447. [ 124.637121] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      448. [ 124.637129] [AUD]: AUDIO_CONTINUE aph=0 0 0
      449. [ 124.772172] FE tune
      450. [ 124.955986] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      451. [ 124.968565] [AUD]: AUDIO_SELECT_SOURCE 0
      452. [ 124.968619] [AUD]: AUDIO_SET_BYPASS_MODE 0
      453. [ 124.968625] [AUD]: AC3 downmix 0 state : 0
      454. [ 124.968636] [AUD]: AUDIO_PAUSE -263930880
      455. [ 124.968645] [AUD]: AUDIO_PLAY -263930880 decoder start : 0
      456. [ 124.970423] [VID]: VIDEO_SELECT_SOURCE 0 1
      457. [ 124.970466] [VID]: VIDEO_SLOWMOTION 0 1
      458. [ 124.970506] [VID]: VIDEO_FAST_FORWARD 0 1 0
      459. [ 124.970527] [VID]: VIDEO_CONTINUE -263930880 1
      460. [ 124.970539] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd2925380
      461. [ 124.970542] [AUD]: Mute : 0
      462. [ 125.497477] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      463. [ 125.504912] [VID]: VIDEO_SLOWMOTION 0 1
      464. [ 125.504977] [VID]: VIDEO_FAST_FORWARD 0 1 0
      465. [ 125.505011] [VID]: VIDEO_CONTINUE -263930880 1
      466. [ 125.505024] [AUD]: AUDIO_CONTINUE -263930880 1 aph=0xd2925380
      467. [ 125.505029] [AUD]: Mute : 0
      468. [ 125.974229] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      469. [ 125.974238] [VID]: VIDEO_GET_SIZE aspect: 1 0
      470. [ 731.358846] [AUD]: AUDIO_STOP -263930880
      471. [ 731.383499] [AUD]: AUDIO_CONTINUE -263930880 0 aph=0x0
      472. [ 731.383507] [AUD]: AUDIO_CONTINUE aph=0 0 0
      473. [ 733.073276] [VID]: VIDEO_SET_STREAMTYPE 0
      474. [ 733.073290] [VID]: VIDEO_SELECT_SOURCE 1 1
      475. [ 733.073346] [VID]: VIDEO_PLAY 1 2 0
      476. [ 733.078637] [VID]: VIDEO_CONTINUE 1 1
      477. [ 733.078645] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      478. [ 733.352605] [VID]: VIDEO_STOP 0 1
      479. [ 733.353525] [VID]: VIDEO_SELECT_SOURCE 0 0
      480. [ 736.109377] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      481. [ 736.194177] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      482. [ 736.276472] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      483. [ 736.362385] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      484. [ 737.072373] [AUD]: AUDIO_SET_MUTE 0
      485. [ 737.072820] [AUD]: AUDIO_SET_MIXER -740614520
      486. [ 737.072829] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      487. [ 737.072834] [AUD]: AUDIO_SET_MIXER : next left volume -1212, right volume -12 12
      488. [ 737.072837] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      489. [ 737.143055] [AUD]: AUDIO_SET_MIXER -740614520
      490. [ 737.143072] [AUD]: AUDIO_SET_MIXER : amixl 16, amixr 16
      491. [ 737.143077] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      492. [ 737.143081] [AUD]: AUDIO_SET_MIXER : next left volume -1212, right volume -12 12
      493. [ 737.644981] FE tune
      494. [ 737.948341] [AUD]: AUDIO_SELECT_SOURCE 0
      495. [ 737.948400] [AUD]: AUDIO_SET_BYPASS_MODE 0
      496. [ 737.948407] [AUD]: AC3 downmix 0 state : 0
      497. [ 737.948419] [AUD]: AUDIO_PAUSE 632205312
      498. [ 737.948428] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      499. [ 737.950254] [VID]: VIDEO_SELECT_SOURCE 0 0
      500. [ 737.951996] [VID]: VIDEO_SLOWMOTION 0 0
      501. [ 737.952034] [VID]: VIDEO_FAST_FORWARD 0 0 0
      502. [ 737.952053] [VID]: VIDEO_CONTINUE 632205312 0
      503. [ 737.952076] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a89f80
      504. [ 737.952080] [AUD]: Mute : 0
      505. [ 737.952232] [AUD]: AUDIO_CHANNEL_SELECT 0
      506. [ 737.975737] FE tune
      507. [ 738.218465] FE tune
      508. [ 738.385385] FE tune
      509. [ 738.674164] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      510. [ 738.676172] BKNI_Malloc(linuxkernel) top users:
      511. [ 738.676172] blocks, bytes, filename:line
      512. [ 738.676181] 2254, 480200, BSEAV/lib/utils/balloc.c:31
      513. [ 769.381197] [AUD]: AUDIO_STOP 632205312
      514. [ 769.405652] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      515. [ 769.405659] [AUD]: AUDIO_CONTINUE aph=0 0 0
      516. [ 769.413275] [AUD]: AUDIO_SELECT_SOURCE 0
      517. [ 769.413329] [AUD]: AUDIO_SET_BYPASS_MODE 0
      518. [ 769.413335] [AUD]: AC3 downmix 0 state : 0
      519. [ 769.413346] [AUD]: AUDIO_PAUSE 632205312
      520. [ 769.413355] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      521. [ 769.415046] [VID]: VIDEO_SELECT_SOURCE 0 1
      522. [ 769.417178] [VID]: VIDEO_SLOWMOTION 0 1
      523. [ 769.417241] [VID]: VIDEO_FAST_FORWARD 0 1 0
      524. [ 769.417265] [VID]: VIDEO_CONTINUE 632205312 1
      525. [ 769.417278] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2830880
      526. [ 769.417282] [AUD]: Mute : 0
      527. [ 769.759489] [AUD]: AUDIO_STOP 632205312
      528. [ 769.785203] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      529. [ 769.785210] [AUD]: AUDIO_CONTINUE aph=0 0 0
      530. [ 769.798247] [AUD]: AUDIO_SELECT_SOURCE 0
      531. [ 769.798302] [AUD]: AUDIO_SET_BYPASS_MODE 0
      532. [ 769.798308] [AUD]: AC3 downmix 0 state : 0
      533. [ 769.798318] [AUD]: AUDIO_PAUSE 632205312
      534. [ 769.798327] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      535. [ 769.800043] [VID]: VIDEO_SELECT_SOURCE 0 1
      536. [ 769.801599] [VID]: VIDEO_SLOWMOTION 0 1
      537. [ 769.801656] [VID]: VIDEO_FAST_FORWARD 0 1 0
      538. [ 769.801678] [VID]: VIDEO_CONTINUE 632205312 1
      539. [ 769.801691] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd490bc80
      540. [ 769.801696] [AUD]: Mute : 0
      541. [ 770.006833] [AUD]: AUDIO_STOP 632205312
      542. [ 770.033329] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      543. [ 770.033337] [AUD]: AUDIO_CONTINUE aph=0 0 0
      544. [ 770.043508] [AUD]: AUDIO_SELECT_SOURCE 0
      545. [ 770.043558] [AUD]: AUDIO_SET_BYPASS_MODE 0
      546. [ 770.043564] [AUD]: AC3 downmix 0 state : 0
      547. [ 770.043574] [AUD]: AUDIO_PAUSE 632205312
      548. [ 770.043583] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      549. [ 770.045344] [VID]: VIDEO_SELECT_SOURCE 0 1
      550. [ 770.046749] [VID]: VIDEO_SLOWMOTION 0 1
      551. [ 770.046815] [VID]: VIDEO_FAST_FORWARD 0 1 0
      552. [ 770.046838] [VID]: VIDEO_CONTINUE 632205312 1
      553. [ 770.046853] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2806380
      554. [ 770.046857] [AUD]: Mute : 0
      555. [ 770.313993] [AUD]: AUDIO_STOP 632205312
      556. [ 770.341631] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      557. [ 770.341641] [AUD]: AUDIO_CONTINUE aph=0 0 0
      558. [ 770.394227] FE tune
      559. [ 770.585667] [AUD]: AUDIO_SELECT_SOURCE 0
      560. [ 770.585718] [AUD]: AUDIO_SET_BYPASS_MODE 0
      561. [ 770.585724] [AUD]: AC3 downmix 0 state : 0
      562. [ 770.585736] [AUD]: AUDIO_PAUSE 632205312
      563. [ 770.585746] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      564. [ 770.587962] [VID]: VIDEO_SELECT_SOURCE 0 1
      565. [ 770.588318] [VID]: VIDEO_SLOWMOTION 0 1
      566. [ 770.588373] [VID]: VIDEO_FAST_FORWARD 0 1 0
      567. [ 770.588395] [VID]: VIDEO_CONTINUE 632205312 1
      568. [ 770.588407] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2806600
      569. [ 770.588410] [AUD]: Mute : 0
      570. [ 771.592194] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      571. [ 771.592203] [VID]: VIDEO_GET_SIZE aspect: 1 0
      572. [ 773.337722] [AUD]: AUDIO_STOP 632205312
      573. [ 773.364307] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      574. [ 773.364315] [AUD]: AUDIO_CONTINUE aph=0 0 0
      575. [ 773.408477] FE tune
      576. [ 773.662032] [AUD]: AUDIO_SELECT_SOURCE 0
      577. [ 773.662084] [AUD]: AUDIO_SET_BYPASS_MODE 0
      578. [ 773.662090] [AUD]: AC3 downmix 0 state : 0
      579. [ 773.662102] [AUD]: AUDIO_PAUSE 632205312
      580. [ 773.662111] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      581. [ 773.663770] [VID]: VIDEO_SELECT_SOURCE 0 1
      582. [ 773.665374] [VID]: VIDEO_SLOWMOTION 0 1
      583. [ 773.665439] [VID]: VIDEO_FAST_FORWARD 0 1 0
      584. [ 773.665464] [VID]: VIDEO_CONTINUE 632205312 1
      585. [ 773.665478] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a89f80
      586. [ 773.665482] [AUD]: Mute : 0
      587. [ 774.171198] [AUD]: AUDIO_STOP 632205312
      588. [ 774.197475] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      589. [ 774.197481] [AUD]: AUDIO_CONTINUE aph=0 0 0
      590. [ 774.240123] FE tune
      591. [ 774.429902] [AUD]: AUDIO_SELECT_SOURCE 0
      592. [ 774.429963] [AUD]: AUDIO_SET_BYPASS_MODE 0
      593. [ 774.429970] [AUD]: AC3 downmix 0 state : 0
      594. [ 774.429981] [AUD]: AUDIO_PAUSE 632205312
      595. [ 774.429990] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      596. [ 774.431656] [VID]: VIDEO_SELECT_SOURCE 0 1
      597. [ 774.432021] [VID]: VIDEO_SLOWMOTION 0 1
      598. [ 774.432072] [VID]: VIDEO_FAST_FORWARD 0 1 0
      599. [ 774.432096] [VID]: VIDEO_CONTINUE 632205312 1
      600. [ 774.432107] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a2e700
      601. [ 774.432112] [AUD]: Mute : 0
      602. [ 774.771160] [AUD]: AUDIO_STOP 632205312
      603. [ 774.798612] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      604. [ 774.798620] [AUD]: AUDIO_CONTINUE aph=0 0 0
      605. [ 774.841745] FE tune
      606. [ 775.034039] [AUD]: AUDIO_SELECT_SOURCE 0
      607. [ 775.034094] [AUD]: AUDIO_SET_BYPASS_MODE 0
      608. [ 775.034100] [AUD]: AC3 downmix 0 state : 0
      609. [ 775.034111] [AUD]: AUDIO_PAUSE 632205312
      610. [ 775.034121] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      611. [ 775.035804] [VID]: VIDEO_SELECT_SOURCE 0 1
      612. [ 775.037330] [VID]: VIDEO_SLOWMOTION 0 1
      613. [ 775.037402] [VID]: VIDEO_FAST_FORWARD 0 1 0
      614. [ 775.037427] [VID]: VIDEO_CONTINUE 632205312 1
      615. [ 775.037442] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd381b100
      616. [ 775.037447] [AUD]: Mute : 0
      617. [ 776.041177] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      618. [ 776.041186] [VID]: VIDEO_GET_SIZE aspect: 1 0
      619. [ 797.309743] [AUD]: AUDIO_STOP 632205312
      620. [ 797.334177] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      621. [ 797.334185] [AUD]: AUDIO_CONTINUE aph=0 0 0
      622. [ 797.490185] FE tune
      623. [ 797.673646] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      624. [ 797.686602] [AUD]: AUDIO_SELECT_SOURCE 0
      625. [ 797.686655] [AUD]: AUDIO_SET_BYPASS_MODE 0
      626. [ 797.686661] [AUD]: AC3 downmix 0 state : 0
      627. [ 797.686672] [AUD]: AUDIO_PAUSE 632205312
      628. [ 797.686681] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      629. [ 797.688762] [VID]: VIDEO_SELECT_SOURCE 0 1
      630. [ 797.688807] [VID]: VIDEO_SLOWMOTION 0 1
      631. [ 797.688848] [VID]: VIDEO_FAST_FORWARD 0 1 0
      632. [ 797.688872] [VID]: VIDEO_CONTINUE 632205312 1
      633. [ 797.688913] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a89f80
      634. [ 797.688923] [AUD]: Mute : 0
      635. [ 798.090466] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      636. [ 798.097919] [VID]: VIDEO_SLOWMOTION 0 1
      637. [ 798.097979] [VID]: VIDEO_FAST_FORWARD 0 1 0
      638. [ 798.098004] [VID]: VIDEO_CONTINUE 632205312 1
      639. [ 798.098017] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a89f80
      640. [ 798.098021] [AUD]: Mute : 0
      641. [ 798.693253] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      642. [ 798.693262] [VID]: VIDEO_GET_SIZE aspect: 1 0
      643. [ 2532.295351] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      644. [ 2532.302759] [VID]: VIDEO_SLOWMOTION 0 1
      645. [ 2532.302808] [VID]: VIDEO_FAST_FORWARD 0 1 0
      646. [ 2532.302831] [VID]: VIDEO_CONTINUE 632205312 1
      647. [ 2532.302844] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd2a89f80
      648. [ 2532.302848] [AUD]: Mute : 0
      649. [ 6138.878987] usb 2-2: USB disconnect, device number 2
      650. [ 6138.882022] end_request: I/O error, dev sda, sector 0
      651. [ 6138.906303] sd 2:0:0:0: [sda] Synchronizing SCSI cache
      652. [ 6138.906484] sd 2:0:0:0: [sda]
      653. [ 6138.906492] Result: hostbyte=0x01 driverbyte=0x00
      654. [ 6223.606641] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      655. [ 6223.607233] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      656. [ 6223.621288] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      657. [ 6223.621342] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041
      658. [ 6223.634588] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 1, inode_bitmap = 1042
      659. [ 6223.648254] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      660. [ 6223.721923] [AUD]: AUDIO_STOP 632205312
      661. [ 6223.746393] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      662. [ 6223.746401] [AUD]: AUDIO_CONTINUE aph=0 0 0
      663. [ 6223.760647] [AUD]: AUDIO_SELECT_SOURCE 0
      664. [ 6223.760696] [AUD]: AUDIO_SET_BYPASS_MODE 0
      665. [ 6223.760703] [AUD]: AC3 downmix 0 state : 0
      666. [ 6223.760713] [AUD]: AUDIO_PAUSE 632205312
      667. [ 6223.760722] [AUD]: AUDIO_PLAY 632205312 decoder start : 0
      668. [ 6223.762516] [VID]: VIDEO_SELECT_SOURCE 0 1
      669. [ 6223.762840] [VID]: VIDEO_SLOWMOTION 0 1
      670. [ 6223.762931] [VID]: VIDEO_FAST_FORWARD 0 1 0
      671. [ 6223.762970] [VID]: VIDEO_CONTINUE 632205312 1
      672. [ 6223.762982] [AUD]: AUDIO_CONTINUE 632205312 1 aph=0xd381b180
      673. [ 6223.762991] [AUD]: Mute : 0
      674. [ 6223.817916] FE tune
      675. [ 6224.781194] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      676. [ 6224.781203] [VID]: VIDEO_GET_SIZE aspect: 1 0
      677. [ 6228.658537] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041
      678. [ 6228.671801] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 1, inode_bitmap = 1042
      679. [ 6228.685462] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      680. [ 6228.685936] Aborting journal on device sda1-8.
      681. [ 6228.690444] Buffer I/O error on device sda1, logical block 243826688
      682. [ 6228.696808] lost page write due to I/O error on sda1
      683. [ 6228.696832] JBD2: Error -5 detected when updating journal superblock for sda1 -8.
      684. [ 6228.707712] FE tune
      685. [ 6238.696924] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041
      686. [ 6238.710142] EXT4-fs error (device sda1): ext4_read_inode_bitmap:174: comm eni gma2: Cannot read inode bitmap - block_group = 1, inode_bitmap = 1042
      687. [ 6238.723316] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detecte d aborted journal
      688. [ 6238.732001] EXT4-fs (sda1): Remounting filesystem read-only
      689. [ 6238.758394] FE tune
      690. [ 6258.767988] FE tune
      691. [ 6298.779683] FE tune
      692. [ 6323.569020] usb 2-2: new SuperSpeed USB device number 3 using xhci-brcm
      693. [ 6323.580895] usb 2-2: Parent hub missing LPM exit latency info. Power managem ent will be impacted.
      694. [ 6323.583713] usb-storage 2-2:1.0: USB Mass Storage device detected
      695. [ 6323.584653] scsi3 : usb-storage 2-2:1.0
      696. [ 6328.656759] scsi 3:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ : 0 ANSI: 6
      697. [ 6328.658295] sd 3:0:0:0: Attached scsi generic sg0 type 0
      698. [ 6328.660573] sd 3:0:0:0: [sdb] 3907029164 512-byte logical blocks: (2.00 TB/1. 81 TiB)
      699. [ 6328.661058] sd 3:0:0:0: [sdb] Write Protect is off
      700. [ 6328.661070] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
      701. [ 6328.661467] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
      702. [ 6328.675329] sdb: sdb1
      703. [ 6328.679145] sd 3:0:0:0: [sdb] Attached SCSI disk
      704. [ 6328.857541] fuse init (API version 7.22)
      705. [ 6328.961043] UDF-fs: warning (device sdb): udf_fill_super: No partition found (2)
      706. [ 6329.011597] UDF-fs: warning (device sdb): udf_fill_super: No partition found (2)
      707. [ 6329.930448] EXT4-fs (sdb1): recovery complete
      708. [ 6329.954175] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
      709. [ 6339.615459] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
      710. [ 6351.268691] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      711. [ 6351.270803] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      712. [ 6351.276572] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      713. [ 6361.425023] [AUD]: AUDIO_STOP 632205312
      714. [ 6361.449933] [AUD]: AUDIO_CONTINUE 632205312 0 aph=0x0
      715. [ 6361.449941] [AUD]: AUDIO_CONTINUE aph=0 0 0
      716. [ 6361.474769] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      717. [ 6362.528321] [VID]: VIDEO_SET_STREAMTYPE 0
      718. [ 6362.528336] [VID]: VIDEO_SELECT_SOURCE 1 1
      719. [ 6362.528392] [VID]: VIDEO_PLAY 1 2 0
      720. [ 6362.533671] [VID]: VIDEO_CONTINUE 1 1
      721. [ 6362.533680] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      722. [ 6362.807502] [VID]: VIDEO_STOP 0 1
      723. [ 6362.808404] [VID]: VIDEO_SELECT_SOURCE 0 0
      724. [ 6363.309082] EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error re ading directory block (ino 2, block 0)
      725. [ 6365.570729] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      726. [ 6365.654715] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      727. [ 6365.735800] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      728. [ 6365.821331] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
      729. [ 6366.526989] [AUD]: AUDIO_SET_MUTE 0
      730. [ 6366.527439] [AUD]: AUDIO_SET_MIXER -740614520
      731. [ 6366.527447] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      732. [ 6366.527451] [AUD]: AUDIO_SET_MIXER : next left volume -1212, right volume -12 12
      733. [ 6366.527454] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      734. [ 6366.617299] [AUD]: AUDIO_SET_MIXER -740614520
      735. [ 6366.617315] [AUD]: AUDIO_SET_MIXER : amixl 16, amixr 16
      736. [ 6366.617319] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      737. [ 6366.617323] [AUD]: AUDIO_SET_MIXER : next left volume -1212, right volume -12 12
      738. [ 6367.072547] FE tune
      739. [ 6367.333010] FE tune
      740. [ 6367.389360] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
      741. [ 6367.530796] [AUD]: AUDIO_SELECT_SOURCE 0
      742. [ 6367.530850] [AUD]: AUDIO_SET_BYPASS_MODE 0
      743. [ 6367.530857] [AUD]: AC3 downmix 0 state : 0
      744. [ 6367.531108] [AUD]: AUDIO_PAUSE -2059220992
      745. [ 6367.531120] [AUD]: AUDIO_PLAY -2059220992 decoder start : 0
      746. [ 6367.532754] [VID]: VIDEO_SELECT_SOURCE 0 0
      747. [ 6367.534543] [VID]: VIDEO_SLOWMOTION 0 0
      748. [ 6367.534585] [VID]: VIDEO_FAST_FORWARD 0 0 0
      749. [ 6367.534605] [VID]: VIDEO_CONTINUE -2059220992 0
      750. [ 6367.534624] [AUD]: AUDIO_CONTINUE -2059220992 1 aph=0xd2a10f80
      751. [ 6367.534628] [AUD]: Mute : 0
      752. [ 6367.534776] [AUD]: AUDIO_CHANNEL_SELECT 0
      753. [ 6367.545700] FE tune
      754. [ 6367.713069] FE tune
      755. [ 6367.862393] FE tune
      756. [ 6371.983316] FE tune
      Alles anzeigen

      Freue mich auf eure Auswertung dazu : ).

      Lieben dank!!!


      Gruß
      - brendy -
    • Das Linux zeigt Lesefehler bei der /dev/sda1 HDD an und mounten die HDD dann readonly. Kann sein, dass nur das Filesystem durcheinander ist.

      Du kannst mal eine filesystemcheck laufen lassen

      dazu auf der CLI (telnet/ssh) eingeben

      umount /dev/sda1

      Wenn das nicht geht, weil das System sagt, dass die hdd busy ist, dann

      init 4
      umount /dev/sda1
      fsck.ext4 -y -f -c /dev/sda1

      Am besten dann die Ausgaben mal protokollieren

      Wenn das fsck durch ist, kannst du das nochmal machen

      Es kann sein, dass die HDD kaputte Sektoren hat. Dann meldet fsck immer wieder Schwierigkeiten. Dann ist die HDD hin.

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von anudanan ()

    • Lieben Dank für dein Feedback dazu @anudanan

      Hmm, die Befehlsausgabe hat leider nicht geklappt, als ob /dev/sda1 gar nicht exestieren würde:

      Quellcode

      1. root@vuuno4k:~# unmount /dev/sda1
      2. -sh: unmount: not found
      3. root@vuuno4k:~# umount /dev/sda1
      4. umount: can't umount /▒dev/sda1: No such file or directory
      5. root@vuuno4k:~# init 4
      6. root@vuuno4k:~# umount /dev/sda1
      7. umount: can't umount /dev/sda1: No such file or directory
      8. root@vuuno4k:~#

      Nu lässt sich atm die VU gar nicht mehr Einschalten !



      LG!
      - brendy -

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von brendy ()

    • Mit init 4 wird das Enigma angehalten

      Du kannst es wieder starten mit init 3 oder einem reboot

      gibt mal mount und blkdi ein und poste die Ausgaben. Die hdd ist aber dran oder?

      Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von hgdo ()