Update in Schritten?

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Update in Schritten?

      Hallo Zusammen

      Ich habe gestern das gemeldete Update durchgeführt und war doch etwas erstaunt dass ich insgesamt 5 Durchläufe machen musste bis alles geladen war. Ist aufgefallen da in 20 Sekunden 60 Pakete geladen und installiert worden sein sollten. Das kann selbst bei einer 200er Leitung nicht sein.

      Nachdem ich gerade den TV angeschaltet habe kam wieder eine Updatemeldung. Ich habs gezählt, 19 mal habe ich den updateprozess gestartet bis alle Pakete geladen und installiert wurden! Bei den ersten 2 Installationsmeldungen sollten 166 Pakete in je ca. 30 Sekunden installiert sein. Dann nahm die Anzahl immer mehr ab. ?(

      Ist das noch bei jemandem passiert oder habe ich ein lokales Problem?

      Gruß
    • wer weiß, welche Gründe es im einzelnen hatte
      wenn alle Updates erfolgreich eingespielt wurden, dann belasse es dabei

      sollte es weiterhin so vorkommen, kannst ja immer noch mal nachfragen (bei einem einzelnen Auftreten würde ich mit erstmal keine Gedanken machen)
      ============================================================================================
    • Hallo shadowrider

      ich habe gerade wieder das selbe Problem gehabt. Diesmal habe ich am terminal mit opkg update und danach opkg upgrade das ganze gestartet.

      Es werden einige Pakete runtergeladen und dann kommt auf einmal ein wget-Fehler 1

      nach Neustart und wiederholtem opkg update und opkg upgrade wird der Rest sauber geladen.

      Ich bin zwar hinter einem Proxy mit der UNO4K aber da ist eigentlich alles sauber eingestellt, sonst hätte es ja bisher bzw. nach Neustart nicht geklappt.
      Proxyeinträge sind in der /etc/opkg/opkg.conf und in der /etc/profile sowie in /usr/bin/enigma2.sh. Dazu habe ich in /home/root eine wgetrc und in /etc eine.wgetrc angelegt.

      Die kann ich zwar weglassen da alle ausgehenden Anfragen an Zielport 80 sowieso mit iptables über den Proxy geleitet werden, Ich habe die einzelnen Dateieinträge deshalb nur zum Test nochmal aktiviert ob da was falsch läuft.

      Mit iptables funktioniert dann auch Mediaportal hinter einem Proxy ohne Probleme.

      Gruß

      Jörg
    • Ich habe gerde noch mal ein opkg update gestartet. Hier die Ausgabe:

      Quellcode

      1. opkg update
      2. Downloading: VTi-all.gz
      3. Inflating: VTi-all
      4. Updated list of available packages in /var/lib/opkg/VTi-all.
      5. Downloading: VTi-all_static.gz
      6. Inflating: VTi-all_static
      7. Updated list of available packages in /var/lib/opkg/VTi-all_static.
      8. Downloading: VTi-armv7ahf-vfp-neon.gz
      9. Inflating: VTi-armv7ahf-vfp-neon
      10. Updated list of available packages in /var/lib/opkg/VTi-armv7ahf-vfp-neon.
      11. Downloading: VTi-armv7ahf-vfp-neon_static.gz
      12. Inflating: VTi-armv7ahf-vfp-neon_static
      13. Updated list of available packages in /var/lib/opkg/VTi-armv7ahf-vfp-neon_static.
      14. Downloading: VTi-softcams_armv7ahf-vfp-neon.gz
      15. Inflating: VTi-softcams_armv7ahf-vfp-neon
      16. Updated list of available packages in /var/lib/opkg/VTi-softcams_armv7ahf-vfp-neon.
      17. Downloading: VTi-thirdparty.gz
      18. Inflating: VTi-thirdparty
      19. Updated list of available packages in /var/lib/opkg/VTi-thirdparty.
      20. Downloading: VTi-vuuno4k.gz
      21. Inflating: VTi-vuuno4k
      22. Updated list of available packages in /var/lib/opkg/VTi-vuuno4k.
      23. Downloading: VTi-vuuno4k_static.gz
      24. Inflating: VTi-vuuno4k_static
      25. Updated list of available packages in /var/lib/opkg/VTi-vuuno4k_static.
      26. root@vuuno4k:~# [6nopkg update
      27. Downloading: VTi-all.gz
      28. Inflating: VTi-all
      29. Updated list of available packages in /var/lib/opkg/VTi-all.
      30. Downloading: VTi-all_static.gz
      31. Inflating: VTi-all_static
      32. Updated list of available packages in /var/lib/opkg/VTi-all_static.
      33. Downloading: VTi-armv7ahf-vfp-neon.gz
      34. Inflating: VTi-armv7ahf-vfp-neon
      35. Updated list of available packages in /var/lib/opkg/VTi-armv7ahf-vfp-neon.
      36. Downloading: VTi-armv7ahf-vfp-neon_static.gz
      37. Inflating: VTi-armv7ahf-vfp-neon_static
      38. Updated list of available packages in /var/lib/opkg/VTi-armv7ahf-vfp-neon_static.
      39. Downloading: VTi-softcams_armv7ahf-vfp-neon.gz
      40. Inflating: VTi-softcams_armv7ahf-vfp-neon
      41. Updated list of available packages in /var/lib/opkg/VTi-softcams_armv7ahf-vfp-neon.
      42. Downloading: VTi-thirdparty.gz
      43. Inflating: VTi-thirdparty
      44. Updated list of available packages in /var/lib/opkg/VTi-thirdparty.
      45. Downloading: VTi-vuuno4k.gz
      46. Inflating: VTi-vuuno4k
      47. Updated list of available packages in /var/lib/opkg/VTi-vuuno4k.
      48. Downloading: VTi-vuuno4k_static.gz
      49. wget: error getting response
      50. Collected errors:
      51. * opkg_download: Failed to download http://vuplussupport.org/openembedded/2.0/vti/20170918_vti-13.0_eeth5roWa/vuuno4k/static/Packages.gz, wget returned 1.
      Alles anzeigen
    • Porxy rauswerfen ist leider keine Option. Mich hat es ja auch gewundert, noch dazu dass bei identischen Einstellungen (iptabels und proxysettings) die 2 alten Dreams die Updates problemlos durchziehen.