Bootzeit extrem laaang

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Bootzeit extrem laaang

      Hallo

      Seit dem letzten Update( 10.03.2018 )
      ist die Bootzeit wirklich schlimm ca 9 min, vorher waren es ca 70 sec.
      Habe noch ein Image Backup 13.02 eingespielt, und das Update noch mal gemacht. Leider das selbe Problem.
      Bis jetzt habe ich alles durch suchen und lesen selbst geschafft, aber jetzt bin ich Ratlos.
      Danke für Eure Hife

    • Schalte mal die Option, dass in der Datenbank vorhandene Sendungen im EPG angezeigt werden, ab und versuch es dann.
      Die Option findest du in Menü -> VTI -> Einstellungen EPG.

    • Hat geholfen, Bootzeit jetzt bei reboot ca 2,5 min
      Ist auch noch lange gegen vorher, aber kein Vergleich zu 9 min.
      Versuche jetzt noch mal mit Netzschalter aus und berichte dann.
      Vielen Dank

    • Hast du irgenwelche Netzwerklaufwerkzugriff eingerichtet, die gerade nicht erreichbar sind?

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von anudanan ()

    • Nur Nas, ist aber online, gerade noch mal getestet
      Habe jetzt mit Netschalter gemessen, und bin bei 120 sec.
      Kann zwar damit leben, aber komisch ist das schon!

      VIeln Dank erstmal vielleicht kommt ja noch der eine oder andere Tip

    • Hier mal die var/log/messages

      Spoiler anzeigen

      Jan 1 01:00:17 vuduo2 syslog.info syslogd started: BusyBox v1.23.2
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_enable: network [1]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm7425_pm_network_enable 00
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_enable: enet [1]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm40nm_pm_genet_enable 00
      Jan 1 01:00:17 vuduo2 user.crit kernel: Found PHY at Address 3
      Jan 1 01:00:17 vuduo2 user.info kernel: bcmgenet: configuring instance #0 for external RGMII
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_disable: enet [0]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm40nm_pm_genet_disable 00
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_disable: network [0]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm7425_pm_network_disable 00
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      Jan 1 01:00:17 vuduo2 user.info kernel: ata1: SATA link down (SStatus 0 SControl 310)
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_enable: usb [1]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm40nm_pm_usb_enable 00
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 1-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 1-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 2-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 2-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 3-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 3-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
      Jan 1 01:00:17 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 4-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 4-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 5-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 5-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
      Jan 1 01:00:17 vuduo2 user.info kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
      Jan 1 01:00:17 vuduo2 user.info kernel: ata2.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
      Jan 1 01:00:17 vuduo2 user.info kernel: ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 6-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 6-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
      Jan 1 01:00:17 vuduo2 user.info kernel: usb 1-1: new high-speed USB device number 2 using ehci-brcm
      Jan 1 01:00:17 vuduo2 user.info kernel: ata2.00: configured for UDMA/133
      Jan 1 01:00:17 vuduo2 user.notice kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off
      Jan 1 01:00:17 vuduo2 user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 7-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 7-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
      Jan 1 01:00:17 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
      Jan 1 01:00:17 vuduo2 user.info kernel: sda: sda1
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 8-0:1.0: USB hub found
      Jan 1 01:00:17 vuduo2 user.info kernel: hub 8-0:1.0: 1 port detected
      Jan 1 01:00:17 vuduo2 user.info kernel: usbcore: registered new interface driver usb-storage
      Jan 1 01:00:17 vuduo2 user.info kernel: mousedev: PS/2 mouse device common for all mice
      Jan 1 01:00:17 vuduo2 user.info kernel: i2c /dev entries driver
      Jan 1 01:00:17 vuduo2 user.info kernel: IR NEC protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR RC5(x) protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR RC6 protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR JVC protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR Sony protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR RC5 (streamzap) protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR SANYO protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
      Jan 1 01:00:17 vuduo2 user.info kernel: gspca_main: v2.14.0 registered
      Jan 1 01:00:17 vuduo2 user.info kernel: sdhci: Secure Digital Host Controller Interface driver
      Jan 1 01:00:17 vuduo2 user.info kernel: sdhci: Copyright(c) Pierre Ossman
      Jan 1 01:00:17 vuduo2 user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
      Jan 1 01:00:17 vuduo2 user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
      Jan 1 01:00:17 vuduo2 user.info kernel: usbcore: registered new interface driver usbhid
      Jan 1 01:00:17 vuduo2 user.info kernel: usbhid: USB HID core driver
      Jan 1 01:00:17 vuduo2 user.info kernel: usb-storage 1-1:1.0: USB Mass Storage device detected
      Jan 1 01:00:17 vuduo2 user.info kernel: scsi2 : usb-storage 1-1:1.0
      Jan 1 01:00:17 vuduo2 user.info kernel: TCP: cubic registered
      Jan 1 01:00:17 vuduo2 user.info kernel: NET: Registered protocol family 17
      Jan 1 01:00:17 vuduo2 user.notice kernel: Key type dns_resolver registered
      Jan 1 01:00:17 vuduo2 user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
      Jan 1 01:00:17 vuduo2 user.info kernel: EBI CS0: setting up NAND flash (primary)
      Jan 1 01:00:17 vuduo2 user.info kernel: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
      Jan 1 01:00:17 vuduo2 user.info kernel: NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64
      Jan 1 01:00:17 vuduo2 user.info kernel: brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
      Jan 1 01:00:17 vuduo2 user.info kernel: Bad block table found at page 524224, version 0x01
      Jan 1 01:00:17 vuduo2 user.info kernel: Bad block table found at page 524160, version 0x01
      Jan 1 01:00:17 vuduo2 user.info kernel: nand_read_bbt: bad block at 0x000019a00000
      Jan 1 01:00:17 vuduo2 user.info kernel: nand_read_bbt: bad block at 0x000024760000
      Jan 1 01:00:17 vuduo2 user.info kernel: nand_read_bbt: bad block at 0x00003c720000
      Jan 1 01:00:17 vuduo2 user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":
      Jan 1 01:00:17 vuduo2 user.notice kernel: 0x000002700000-0x000040000000 : "rootfs"
      Jan 1 01:00:17 vuduo2 user.notice kernel: 0x000002700000-0x000040000000 : "rootfs(redundant)"
      Jan 1 01:00:17 vuduo2 user.notice kernel: 0x000000200000-0x000000900000 : "kernel"
      Jan 1 01:00:17 vuduo2 user.notice kernel: 0x000000900000-0x000000b00000 : "mac"
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: attaching mtd0 to ubi0
      Jan 1 01:00:17 vuduo2 user.info kernel: usb 2-1: new high-speed USB device number 2 using ehci-brcm
      Jan 1 01:00:17 vuduo2 user.info kernel: usb 4-1: new high-speed USB device number 2 using ehci-brcm
      Jan 1 01:00:17 vuduo2 user.notice kernel: random: nonblocking pool is initialized
      Jan 1 01:00:17 vuduo2 user.notice kernel: scsi 2:0:0:0: Direct-Access PNY USB 2.0 FD 4096 PQ: 0 ANSI: 0 CCS
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 2:0:0:0: [sdb] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 2:0:0:0: [sdb] Write Protect is off
      Jan 1 01:00:17 vuduo2 user.debug kernel: sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page found
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page found
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
      Jan 1 01:00:17 vuduo2 user.info kernel: sdb:
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] No Caching mode page found
      Jan 1 01:00:17 vuduo2 user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
      Jan 1 01:00:17 vuduo2 user.notice kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: scanning is finished
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: good PEBs: 7873, bad PEBs: 7, corrupted PEBs: 0
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: max/mean erase counter: 205/51, WL threshold: 4096, image sequence number: 1886418566
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 7873, PEBs reserved for bad PEB handling: 153
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 54
      Jan 1 01:00:17 vuduo2 user.info kernel: ALSA device list:
      Jan 1 01:00:17 vuduo2 user.info kernel: No soundcards found.
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: parse sync
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 57
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
      Jan 1 01:00:17 vuduo2 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 27E2A118-5DEF-4AFD-B173-7C43713082B2, small LPT model
      Jan 1 01:00:17 vuduo2 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:12.
      Jan 1 01:00:17 vuduo2 user.info kernel: devtmpfs: mounted
      Jan 1 01:00:17 vuduo2 user.info kernel: Freeing unused kernel memory: 244K (80783000 - 807c0000)
      Jan 1 01:00:17 vuduo2 daemon.info kernel: udevd[75]: starting version 182
      Jan 1 01:00:17 vuduo2 user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
      Jan 1 01:00:17 vuduo2 user.warn kernel: rtusb init rt2870 --->
      Jan 1 01:00:17 vuduo2 user.warn kernel: === pAd = e0341000, size = 511128 ===
      Jan 1 01:00:17 vuduo2 user.warn kernel: <-- RTMPAllocTxRxRingMemory, Status=0
      Jan 1 01:00:17 vuduo2 user.warn kernel: <-- RTMPAllocAdapterBlock, Status=0
      Jan 1 01:00:17 vuduo2 user.info kernel: usbcore: registered new interface driver rt2870
      Jan 1 01:00:17 vuduo2 user.info kernel: kjournald starting. Commit interval 5 seconds
      Jan 1 01:00:17 vuduo2 user.warn kernel: EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
      Jan 1 01:00:17 vuduo2 user.info kernel: EXT3-fs (sda1): using internal journal
      Jan 1 01:00:17 vuduo2 user.info kernel: EXT3-fs (sda1): mounted filesystem with ordered data mode
      Jan 1 01:00:17 vuduo2 user.warn kernel: FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
      Jan 1 01:00:17 vuduo2 user.warn kernel: procmk_init
      Jan 1 01:00:17 vuduo2 user.warn kernel: bcm_event: module license 'Proprietary' taints kernel.
      Jan 1 01:00:17 vuduo2 user.warn kernel: Disabling lock debugging due to kernel taint
      Jan 1 01:00:17 vuduo2 user.warn kernel: Booted !
      Jan 1 01:00:17 vuduo2 user.info kernel: DVB: registering new adapter (_vuplus_duo2_)
      Jan 1 01:00:17 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Jan 1 01:00:17 vuduo2 user.warn kernel: Hotplug - status.connected 1:0:0
      Jan 1 01:00:17 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Jan 1 01:00:17 vuduo2 user.warn kernel: Hotplug - connecting HDMI to display 0xe
      Jan 1 01:00:17 vuduo2 user.warn kernel: [GPIO]Default
      Jan 1 01:00:17 vuduo2 user.warn kernel: [GP]:brcm_pwm_init
      Jan 1 01:00:17 vuduo2 user.info kernel: brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      Jan 1 01:00:17 vuduo2 user.warn kernel: [MPVR]: >> misc_pvr_init
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: ^A6bcm7335_video_init
      Jan 1 01:00:17 vuduo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      Jan 1 01:00:17 vuduo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:
      Jan 1 01:00:17 vuduo2 user.warn kernel: blocks, bytes, filename:line
      Jan 1 01:00:17 vuduo2 user.warn kernel: 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      Jan 1 01:00:17 vuduo2 user.warn kernel: 397, 28584, magnum/commonutils/mrc/src/bmrc_monitor.c:666
      Jan 1 01:00:17 vuduo2 user.warn kernel: [AUD]: ^A6bcm7335_audio_init
      Jan 1 01:00:17 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Jan 1 01:00:17 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Jan 1 01:00:17 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Jan 1 01:00:17 vuduo2 user.warn kernel: bcm7424: bcm7335_frontend_init(): vtuner1 : 4
      Jan 1 01:00:17 vuduo2 user.warn kernel: KSEG1 : 0x80000000
      Jan 1 01:00:17 vuduo2 user.warn kernel: lcr 0x3
      Jan 1 01:00:17 vuduo2 user.warn kernel: irq : 63 ret : 0
      Jan 1 01:00:17 vuduo2 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input0
      Jan 1 01:00:17 vuduo2 user.warn kernel: Resistor Div: 0x1
      Jan 1 01:00:17 vuduo2 user.warn kernel: Duo2 LCD initialized 1
      Jan 1 01:00:17 vuduo2 user.info kernel: [LCD]: registered
      Jan 1 01:00:17 vuduo2 user.info kernel: [CI]: registered ci0 249
      Jan 1 01:00:17 vuduo2 user.info kernel: [CI]: registered ci1 248
      Jan 1 01:00:17 vuduo2 user.info kernel: [CI]: CI interface initialised
      Jan 1 01:00:17 vuduo2 user.info kernel: [DFP]: registered dbox fp
      Jan 1 01:00:17 vuduo2 user.info kernel: [DFP]: Scart 9597 is found 1
      Jan 1 01:00:17 vuduo2 user.info kernel: [SC]: registered sci0
      Jan 1 01:00:17 vuduo2 user.info kernel: [SC]: registered sci1
      Jan 1 01:00:17 vuduo2 user.warn kernel: system_time_set wakeup mode get
      Jan 1 01:00:17 vuduo2 user.warn kernel: system_time_set wakeup mode get 0xc4
      Jan 1 01:00:17 vuduo2 user.warn kernel: FP Update Driver Loaded
      Jan 1 01:00:17 vuduo2 user.warn kernel: VFDController Update Driver Loaded
      Jan 1 01:00:17 vuduo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      Jan 1 01:00:17 vuduo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:
      Jan 1 01:00:17 vuduo2 user.warn kernel: blocks, bytes, filename:line
      Jan 1 01:00:17 vuduo2 user.warn kernel: 1628, 359656, BSEAV/lib/utils/balloc.c:31
      Jan 1 01:00:17 vuduo2 user.warn kernel: 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_enable: network [1]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm7425_pm_network_enable 00
      Jan 1 01:00:17 vuduo2 user.debug kernel: __clk_enable: enet [1]
      Jan 1 01:00:17 vuduo2 user.debug kernel: bcm40nm_pm_genet_enable 00
      Jan 1 01:00:17 vuduo2 user.info kernel: bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_STOP 0 1
      Jan 1 01:00:17 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
      Jan 1 01:00:17 vuduo2 user.info kernel: NET: Registered protocol family 10
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Found user 'avahi' (UID 996) and group 'avahi' (GID 995).
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Successfully dropped root privileges.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: avahi-daemon 0.6.31 starting up.
      Jan 1 01:00:17 vuduo2 daemon.warn avahi-daemon[568]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Successfully called chroot().
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Successfully dropped remaining capabilities.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Loading service file /services/sftp-ssh.service.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Loading service file /services/ssh.service.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.0.0.170.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: New relevant interface eth0.IPv4 for mDNS.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Network interface enumeration completed.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Registering new address record for fe80::21d:ecff:fe05:78ab on eth0.*.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Registering new address record for 10.0.0.170 on eth0.IPv4.
      Jan 1 01:00:17 vuduo2 daemon.info avahi-daemon[568]: Registering HINFO record with values 'MIPS'/'LINUX'.
      Jan 1 01:00:17 vuduo2 daemon.err wsdd[591]: udp_send: Failed to send udp packet with Invalid argument
      Jan 1 01:00:17 vuduo2 daemon.err wsdd[591]: Failed to send hello with Invalid argument
      Jan 1 01:00:18 vuduo2 daemon.info avahi-daemon[568]: Server startup complete. Host name is vuduo2.local. Local service cookie is 2576739027.
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_STOP 0 1
      Jan 1 01:00:18 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
      Jan 1 01:00:19 vuduo2 daemon.info avahi-daemon[568]: Service "vuduo2" (/services/ssh.service) successfully established.
      Jan 1 01:00:19 vuduo2 daemon.info avahi-daemon[568]: Service "vuduo2" (/services/sftp-ssh.service) successfully established.
      Jan 1 01:00:21 vuduo2 user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
      Jan 1 01:00:28 vuduo2 user.warn kernel: [AUD]: HDMI Max Audio PCM Channels=2
      Jan 1 01:00:28 vuduo2 user.warn kernel: [AUD]: connected : 1, 7 (Ac3 : 7) is not supported in this hdmi
      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MUTE 0
      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER -846733840
      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      Jan 1 01:01:18 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:19 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:23 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:35 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER -846733840
      Jan 1 01:01:35 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
      Jan 1 01:01:35 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      Jan 1 01:01:35 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
      Jan 1 01:01:38 vuduo2 user.warn kernel: FE tune
      Jan 1 01:01:39 vuduo2 user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AC3 downmix 1 state : 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_PAUSE 7959200
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_PLAY 7959200 decoder start : 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_FREEZE 7959200 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 7959200 5 2
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 7959200 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 7959200 1 aph=0xcdaac200
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: Mute : 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_CHANNEL_SELECT 0
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 6
      Jan 1 01:01:39 vuduo2 user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 7959200 1
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 7959200 1 aph=0xcdaac200
      Jan 1 01:01:39 vuduo2 user.warn kernel: [AUD]: Mute : 0
      Mar 14 07:52:44 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Mar 14 07:52:44 vuduo2 user.warn kernel: Hotplug - status.connected 0:1:0
      Mar 14 07:52:44 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Mar 14 07:52:44 vuduo2 user.warn kernel: Hotplug - Disconnecting HDMI from display
      Mar 14 07:52:45 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Mar 14 07:52:45 vuduo2 user.warn kernel: Hotplug - status.connected 1:0:2
      Mar 14 07:52:45 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Mar 14 07:52:45 vuduo2 user.warn kernel: Hotplug - connecting HDMI to display 0xe
      Mar 14 07:52:45 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Mar 14 07:52:45 vuduo2 user.warn kernel: Hotplug - status.connected 1:1:2
      Mar 14 07:53:04 vuduo2 cron.err crond[531]: time disparity of 25350172 minutes detected


      mit debug-log aktivieren kann ich leider nichts anfangen bzw verstehe nicht wie man das macht.

      Danke un LG

    • 2410 schrieb:

      Jan 1 01:00:43 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      Jan 1 01:01:18 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:19 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:23 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Jan 1 01:01:35 vuduo2 user.warn kernel: [AUD]: AUDIO_SET_MIXER -846733840
      hier vergeht viel Zeit.

      Hast Du irgendwelche USB-Geräte angeschlossen?

    • gsmgrufti schrieb:

      Scheint dein LCD4Linux zu sein:

      01:00:43.640 [e2-python] [LCD4linux] init Device
      01:00:45.171 [e2-core] main thread is non-idle! display spinner!
      01:00:47.590 [e2-core] main thread is non-idle! display spinner!
      01:01:34.914 [e2-python] EMC: +++ EMC git20160416 startup
      Funktioniert aber scheinbar einwandfrei

      Nur abstecken, oder mal LCD4Linux deinstallieren

      Supergroßes Danke für Eure Hilfe

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von 2410 ()

    • Habe mal LCD4Linux entfernt, leider keine merkliche Besserung

      Spoiler anzeigen

      01:00:41.240 [e2-core] resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebAdmin/web-data
      01:00:41.241 [e2-core] resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebAdmin/web-data
      01:00:41.309 [e2-python] [MediaInfo] READ OLD JOBS !!!
      01:00:41.316 [e2-python] [DataBase] init database: /media/hdd/epg.db
      01:00:43.240 [e2-core] main thread is non-idle! display spinner!
      01:00:45.491 [e2-core] main thread is non-idle! display spinner!
      01:01:32.956 [e2-python] EMC: +++ EMC git20160416 startup
      01:01:32.969 [e2-python] [EMC] checkImg is Vti
      01:01:32.973 [e2-python] [EMC] checkImg is not newPiconRenderer cannot import name getPiconName
      01:01:32.974 [e2-python] [MultiQuickButton] enabled: True
      01:01:33.034 [e2-python] [VPS-Plugin] next execution in 900 sec
      01:01:33.036 [e2-core] resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/vps/web-data
      01:01:33.036 [e2-core] resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/vps/web-data
      01:01:33.049 [e2-python] [AutoShutDown] start....
      01:01:33.060 [e2-python] port changed to DVI
      Dateien

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von 2410 ()

    • kann es sein, das du auf einem kanal startest, welcher keine systemzeit-Setzung ermöglicht?
      damit kommen alle zeitabhängigen Funktionen der Box erstmal durcheinander!

      starte die Box mal auf ARD/ZDF

      Quellcode

      1. 01:01:33.547 [e2-python] /usr/lib/python2.7/site-packages/requests/packages/urllib3/connection.py:303: SystemTimeWarning: System time is way off (before 2014-01-01). This will probably lead to SSL verification errors SystemTimeWarning
      ============================================================================================

    • Leider kein Erfolg
      Wie gesagt kam das erst Seit dem letzten Update( 10.03.2018 ).
      Ich habe nichts geändert, nur onlineupdate gemacht, danach ca 9min Bootzeit.
      nach dem Tip von @hgdo auf 2 min runter

      bis

      Quellcode

      1. 01:00:40.901 [e2-python] [MediaInfo] READ OLD JOBS !!![/tt]
      3. [tt]01:00:40.905 [e2-python] [DataBase] init database: /media/hdd/epg.db[/tt]
      5. [tt]01:00:42.876 [e2-core] main thread is non-idle! display spinner![/tt]
      7. [tt]01:00:45.311 [e2-core] main thread is non-idle! display spinner![/tt]
      9. [tt]01:01:32.400 [e2-python] EMC: +++ EMC git20160416 startup[/tt]
      11. [tt]01:01:32.413 [e2-python] [EMC] checkImg is Vti[/tt]
      13. [tt]01:01:32.416 [e2-python] [EMC] checkImg is not newPiconRenderer cannot
      Alles anzeigen



      scheint ja alles ok

      Danke

      dvbapp2_debug_loop.log
      Ohne LZD4Liunx Starkanal ARD

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von 2410 ()