Angepinnt Barry Allen 5.1.17

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Gehe ich recht in der Annahme, dass dies auch nur vom Hersteller in irgendwelchen closed-source-Komponenten gefixt werden könnte?

    Das Performancethema wird übrigens IMHO deutlich überbewertet. Der gute alte Topfield 7700HDPVR büsst bei Verwendung von HD-Skins nicht merklich an Performance ein - und der hat sicherlich weniger Reserven als der VU+.

  • Original von cocksy
    Das mit denn HD Skin´s ist in Arbeit. Also sollte auch bald gehen!!!!!!!!

    Das ist ein gute nachricht

  • Hallo

    wenn ich img wechslen möchte über barry allen bekome immer fehler (image is empty)
    aber img liegt unter media/ba/ba

  • Original von tosun1
    Hallo

    wenn ich img wechslen möchte über barry allen bekome immer fehler (image is empty)
    aber img liegt unter media/ba/ba


    booten zwichen
    vti img--->icvs img geht
    vti img--->gemini geht
    icvs img--->gemini 4.60 geht
    gemini----> vti img geht nicht
    icvs------>vti img geht nicht

  • mach mal ein ba.sh info (oder infos über images auswählen im Wizard zu den installierten Images des BA Plugins)

    Das sollte das eigentlich wieder reparieren.

    Wenn nicht erstmals wieder Flash booten dann sollte es gehen
    Bad mood, bad manners, bad Plugins, you have been warned :whistling:

    Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von gutemine ()

  • von flash habe ich auch probiert

    ausser vti img geht. vti geht nicht
    ba.sh info:

    Brainfuck-Quellcode

    1. ************************** * * * The Gemini Project * * * ************************** OpenDreambox 4.6.0 dm8000 dm8000 login: root Password: root@dm8000:~# ba.sh info ------------------------------------------------------------- Barry Allen V5.0.27 ------------------------------------------------------------- You are booted from: gemini2-460 ------------------------------------------------------------- [: /media/ba: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand [: on: unknown operand List of Installed Images at /media/ba/ba ------------------------------------------------------------- Size Name ------------------------------------------------------------- 12.0k 0 (0) 94.4M gemini2-460 117.0M iCVS-1 95.4M vti-image 97.0M vti-image-1 grep: on: No such file or directory grep: ty: No such file or directory ------------------------------------------------------------- /dev/sdb1 on /media/ba ty Total: 7543 MB Free: 6536 MB ------------------------------------------------------------- root@dm8000:~#

  • Danke fürs Testen mit den Drea,box Images.

    Da muss ich mir wohl noch die Zeit nehmen den Harddisk Support und den Support für die Dreambox images ein bischen zu debuggen. Mal sehen wann ich Zeit/Lust habe eine 5.0.28 zu machen.

    LG
    gutemine
    Bad mood, bad manners, bad Plugins, you have been warned :whistling:

  • VU+ Barry Allen = working DUO

    On my VU+ with VTI (latest in flash) can I switch succesfully between VTI and Oozoon (DM7025+ full version) AND back.

    Barry Allen did succeed on my USB (microSD 4Gb) in lower back USB-slot.

    Tried also to make a copy of flash to Image but messed that up a little, will try again today.

    My 'trail and error journey' continues.

    Next test: Webcontrole frames still there, no actual info anymore (loading...).

    Gg.

    [SIZE=7]Missed some version info.[/SIZE]

    Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von ggaljoen ()

  • ich flashe mein vu+ täglich 2-3 mal :-)) ich glaube mahe ich ein record :-))
    letztes mal wolte ich Pauli Neutrino Keymap V6.12 for DM7025, DM800 and DM8000.ipk
    instalieren

    Hab per telnet instaliert und neu gestartet
    immer was schief geht , bleibt box bei baryy allen hängen

    Quellcode

    1. BCM97335B0 CFE v2.17, CFE core v2.12, Endian Mode: Little Build Date: Wed Dec 9 17:23:18 2009 (shcheong@ncsh) Copyright (C) Broadcom Corporation. writing vfd DDR Freq: 395MHz CPU speed: 405MHz Memory Config: 32+16 non-UMA Device Tech: 1Gb Total memory: 384MB Boot Device: NAND ECC: Hamming Total flash: 128MB Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub CFE initialized. USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 overcurrent change... USB: Port 1 in overcurrent state...not re-enabling power USB: Port 1 in overcurrent state...not re-enabling power checking usb Loader:elf Filesys:raw Dev:flash0.kernel File: Options:rootfstype=jffs2 root=/d3 Loading: 0x80001000/3825028 0x803a6d84/176784 Entry address is 0x80384000 TP1 Entry Address at 0x80000ffc = 80384000 Starting program at 0x80384000 <5>Linux version 2.6.18-6.6 (shcheong@NcshN) (gcc version 4.2.0 20070124 (prere9 Fetching vars from bootloader... OK (E,D,B,C) Detected 256 MB on MEMC0 (strap 0xe5430060) CFE EnvVar: LINUX_FFS_STARTAD: 00000000, LINUX_FFS_SIZE: 07600000 CFE EnvVar: LINUX_PART_STARTAD: 07600000, LINUX_PART_SIZE: 00200000 g_board_RAM_size=256MB Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1 CPU revision is: 0002a044 FPU revision is: 00130001 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) User-defined physical RAM map: node [00000000, 08000000: RAM] node [08000000, 08000000: RSVD] <5>Reserving 128 MB upper memory starting at 08000000 <7>On node 0 totalpages: 65536 <7> DMA zone: 65536 pages, LIFO batch:15 Built 1 zonelists. Total pages: 65536 <5>Kernel command line: rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 b0 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, linesize 64 bytes. <6>Synthesized TLB refill handler (23 instructions). <6>Synthesized TLB load handler fastpath (37 instructions). <6>Synthesized TLB store handler fastpath (37 instructions). <6>Synthesized TLB modify handler fastpath (36 instructions). PID hash table entries: 2048 (order: 11, 8192 bytes) Found MIPS counter frequency: 203 Mhz Using 202.500 MHz high precision timer. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 124672k/262144k available (3038k kernel code, 137308k reserved, 554k da) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. plat_prepare_cpus: ENABLING 2nd Thread... TP0: prom_boot_secondary: Kick off 2nd CPU... CPU revision is: 0002a044 FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, linesize 64 bytes. Synthesized TLB refill handler (23 instructions). Brought up 2 CPUs migration_cost=1000 NET: Registered protocol family 16 registering PCI controller with io_map_base unset registering PCI controller with io_map_base unset SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered brcm-pm: disabling power to USB block brcm-pm: disabling power to ENET block brcm-pm: disabling power to SATA block audit: initializing netlink socket (disabled) audit(946684800.124:1): initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc. yaffs Dec 17 2009 10:54:14 Installing. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing enabled serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A loop: loaded (max 8 devices) brcm-pm: enabling power to ENET block Broadcom BCM7335 P20 Ethernet Network Device v2.0 Dec 17 2009 10:54:42 Config Internal PHY Through MDIO: Auto-negotiation timed-out : 10 MB Half-Duplex (assumed) BCM97XXX flash device: 0x04000000 @ 0x1c000000 Broadcom STB NAND controller (BrcmNand Controller) i=0, CS[0] = 0 brcmnand_probe: CS0: dev_id=ecf10095 NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff timing1 not adjusted: 5363444f timing2 not adjusted: 00000fc6 BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB Found NAND: ACC=d3000000, cfg=55042200, flashId=ecf10095, tim1=5363444f, tim2=06 BrcmNAND version = 0x0201 128MB @00000000 brcmnand_probe: CS0: dev_id=ecf10095 Found NAND chip on Chip Select 0, chipSize=128MB, usable size=128MB, base=0x brcmnand_scan: B4 nand_select = 40000101 brcmnand_scan: After nand_select = 40000101 page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17 Brcm NAND controller version = 2.1 NAND flash size 128MB @18000000 mtd->oobsize=64, mtd->eccOobSize=16 brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=50, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3 brcmnand_default_bbt: bbt_td = bbt_main_descr brcmnandCET: Status -> Deferred numchips=1, size=8000000 Creating 7 MTD partitions on "bcm7xxx-nand.0": 0x0000000000000000-0x0000000007600000 : "rootfs" 0x0000000007600000-0x0000000007800000 : "kernel" 0x0000000007800000-0x0000000007c00000 : "boot" 0x0000000007c00000-0x0000000007d00000 : "cfe" 0x0000000007d00000-0x0000000007d80000 : "mac" 0x0000000007d80000-0x0000000007e00000 : "env" 0x0000000007e00000-0x0000000007f00000 : "nvm" usbmon: debugfs is not available ehci_hcd_brcm_init: Initializing 2 EHCI controller(s) brcm-pm: enabling power to USB block 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0) drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller - USB h/w setup mode <B> - USB power enable set for active HIGH mode brcm-ehci brcm-ehci.0: BRCM EHCI brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1 brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300 brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1) hub 1-0:1.0: over-current change on port 1 drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2 brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500 brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd_brcm_init: Initializing 2 OHCI controller(s) 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0) drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480408 <-- brcm_start_hc brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3 brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1) drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480608 <-- brcm_start_hc brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4 brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600 usb 1-2: new high speed USB device using brcm-ehci and address 2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usb 1-1: new high speed USB device using brcm-ehci and address 3 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new driver rtl8150 usbcore: registered new driver asix usbcore: registered new driver cdc_ether usbcore: registered new driver net1080 usbcore: registered new driver zaurus TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (jffs2 filesystem). Freeing unused kernel memory: 140k freed mount: /proc/mounts: No such file or directory procmk_init $Id: bcm7335_init.c Ver. 0.1$ DVB: registering new adapter (BM750S). bcm7335: hotplug_callback(): Hotplug - status.connected 1 bcm7335: hotplug_callback(): Hotplug - connecting HDMI to display bcm7335_demux_init: $Id: bcm7335_demux.c,v 0.5 $ DVB: register adapter0/demux0 @ minor: 4 (0x04) DVB: register adapter0/dvr0 @ minor: 5 (0x05) DVB: register adapter0/net0 @ minor: 7 (0x07) DVB: register adapter0/demux1 @ minor: 20 (0x14) DVB: register adapter0/dvr1 @ minor: 21 (0x15) DVB: register adapter0/net1 @ minor: 23 (0x17) DVB: register adapter0/demux2 @ minor: 36 (0x24) DVB: register adapter0/dvr2 @ minor: 37 (0x25) DVB: register adapter0/net2 @ minor: 39 (0x27) DVB: register adapter0/demux3 @ minor: 52 (0x34) DVB: register adapter0/dvr3 @ minor: 53 (0x35) DVB: register adapter0/net3 @ minor: 55 (0x37) DVB: register adapter0/demux4 @ minor: 68 (0x44) DVB: register adapter0/dvr4 @ minor: 69 (0x45) DVB: register adapter0/net4 @ minor: 71 (0x47) DVB: register adapter0/demux5 @ minor: 84 (0x54) DVB: register adapter0/dvr5 @ minor: 85 (0x55) DVB: register adapter0/net5 @ minor: 87 (0x57) DVB: register adapter0/demux6 @ minor: 100 (0x64) DVB: register adapter0/dvr6 @ minor: 101 (0x65) DVB: register adapter0/net6 @ minor: 103 (0x67) DVB: register adapter0/demux7 @ minor: 116 (0x74) DVB: register adapter0/dvr7 @ minor: 117 (0x75) DVB: register adapter0/net7 @ minor: 119 (0x77) [VID]: <6>bcm7335_video_init DVB: register adapter0/video0 @ minor: 0 (0x00) [AUD]: <6>bcm7335_audio_init DVB: register adapter0/audio0 @ minor: 1 (0x01) DVB: registering frontend 0 (BCM7335 FE)... DVB: register adapter0/frontend0 @ minor: 3 (0x03) DVB: registering frontend 0 (BCM7335 FE)... DVB: register adapter0/frontend1 @ minor: 19 (0x13) <<< bcm7335_fb_init ret : 0 [MPVR]: >> misc_pvr_init [DFP]: registered dbox fp [DFP]:Select TV = 0 [DFP]:End Select TV Type [DFP]: format=28 ratio=2 [DFP]: format=28 ratio=2 DVB: register adapter0/ca0 @ minor: 6 (0x06) [EVT]: registered [LCD]: registered [LCD]:vfd reply success 2 [LCD]:bm750_dbox_lcd_write_data [LCD]:vfd reply success 2 [CI]:------------------------------------------------------------BM750_PCB_1_2 [CI]: registered ci0 [CI]: registered ci1 [SC]: registered sci0 [SC]: registered sci1 brcm-pm: enabling power to SATA block ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42 ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42 scsi0 : sata_svw ata1: SATA link down (SStatus 4 SControl 300) ATA: abnormal status 0x7F on port 0xb051001c scsi1 : sata_svw ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000) ata2.00: ATA-7, max UDMA7, 1953525168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 0 ata2.00: configured for UDMA/133 Vendor: ATA Model: SAMSUNG HD103SI Rev: 1AG0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sd 1:0:0:0: Attached scsi disk sda sd 1:0:0:0: Attached scsi generic sg0 type 0 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. NTFS driver 2.1.27 [Flags: R/W MODULE]. usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Perr usbcore: registered new driver belkin drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Sere usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver Vendor: SanDisk Model: Cruzer Rev: 7.01 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 15701759 512-byte hdwr sectors (8039 MB) sdb: Write Protect is off sdb: assuming drive cache: write through SCSI device sdb: 15701759 512-byte hdwr sectors (8039 MB) sdb: Write Protect is off sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 init is called d[VID]: VIDEO_SELECT_SOURCE 1 uring boot witho[VID]: VIDEO_PLAY 1 2 0 ut parameters [VID]: VIDEO_CONTINUE 1 1 [LCD]:bm750_dbox_lcd_write_icon 12 0 [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 therefore starting barryallen bootmanager [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [LCD]:bm750_dbox_lcd_write_icon 12 0 [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [LCD]:bm750_dbox_lcd_write_icon 12 0 [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 init is called during boot without parameters therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 init is called d[VID]: VIDEO_CONTINUE 1 1 uring boot witho[LCD]:bm750_dbox_lcd_write_icon 12 0 ut parameters [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 init is called d[VID]: VIDEO_CONTINUE 1 1 uring boot witho[LCD]:bm750_dbox_lcd_write_icon 12 0 ut parameters [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [LCD]:bm750_dbox_lcd_write_icon 12 0 [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 init is called during boot without parameters therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' init is called during boot without parameters therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [LCD]:bm750_dbox_lcd_write_icon 12 0 [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 init is called d[VID]: VIDEO_CONTINUE 1 1 uring boot witho[LCD]:bm750_dbox_lcd_write_icon 12 0 ut parameters [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 fat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 SM' vfat: version magic '2.6.12-5.1-brcmstb-dm8000 gcc-4.1' should be '2.6.18-6.6 S' [VID]: VIDEO_SET_STREAMTYPE 0 [LCD]:bm750_dbox_lcd_write_icon 2 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 init is called d[VID]: VIDEO_CONTINUE 1 1 uring boot witho[LCD]:bm750_dbox_lcd_write_icon 12 0 ut parameters [LCD]:bm750_dbox_lcd_write_icon 13 0 [LCD]:bm750_dbox_lcd_write_icon 14 0 therefore starting barryallen bootmanager /dev/dvb/adapter0/video0: Device or resource busy [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von tosun1 ()

  • so testet man auch keine enigma2 plugins von denen man nicht weis ob sie funktioniere !

    init 4
    ipkg install /tmp/plugin.ipk
    enigma2
    wenn das enigma2 dann nicht startet fixed man entweder das problem oder macht
    ipkg remove plugin

    Sonst bist du ohne bootmanager aufgeschmissen und kannst nur mehr von vorne anfangen (na ja man kann das BA device rausnehmen, vom flash booten ein /noba directory im Flash anlegen, damit mit BA vom Flash booten und das image löschen/reparieren, /noba directory wieder entfernen)
    Bad mood, bad manners, bad Plugins, you have been warned :whistling:

  • Soll ich die udev mal als Standart in das VTI Image aufnehmen, dann mache ich ein update über den Feed und passe die

    /media/disk/oe/vuplus/bm750/local/packages/udev/udev-124/mbox/init:

    Shell-Script

    1. #!/bin/sh -e
    2. ### BEGIN INIT INFO
    3. # Provides: udev
    4. # Required-Start: mountkernfs
    5. # Required-Stop:
    6. # Default-Start: S
    7. # Default-Stop:
    8. # Short-Description: Start udevd, populate /dev and load drivers.
    9. ### END INIT INFO
    11. # This script is based on Debian's.
    13. COLDPLUG=no
    14. COLDPLUG_TARBALL="/lib/udev/devices.tar.gz"
    16. for x in $(cat /proc/cmdline); do
    17. case $x in
    18. coldplug)
    19. COLDPLUG=yes
    20. ;;
    21. esac
    22. done
    24. # we need to unmount /dev/pts/ and remount it later over the tmpfs
    25. unmount_devpts() {
    26. if mountpoint -q /dev/pts/; then
    27. umount -n -l /dev/pts/
    28. fi
    30. if mountpoint -q /dev/shm/; then
    31. umount -n -l /dev/shm/
    32. fi
    33. }
    35. # mount a tmpfs over /dev, if somebody did not already do it
    36. mount_tmpfs() {
    37. if grep -q "/dev tmpfs" /proc/mounts; then
    38. return
    39. fi
    41. if ! mount -n -o size=$tmpfs_size,mode=0755 -t tmpfs udev /dev; then
    42. echo "udev requires tmpfs support, not started."
    43. exit 1
    44. fi
    46. return 0
    47. }
    49. create_dev_makedev() {
    50. if [ -e /sbin/MAKEDEV ]; then
    51. ln -sf /sbin/MAKEDEV /dev/MAKEDEV
    52. else
    53. ln -sf /bin/true /dev/MAKEDEV
    54. fi
    55. }
    57. make_extra_nodes() {
    58. ret=1
    59. #csh why?
    60. # if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then
    61. cp -a /lib/udev/devices/* /$1/
    62. ret=0
    63. # fi
    65. [ -e /etc/udev/links.conf ] || return $ret
    67. grep '^[^#]' /etc/udev/links.conf | \
    68. while read type name arg1; do
    69. [ "$type" -a "$name" -a ! -e "/$1/$name" -a ! -L "/$1/$name" ] || continue
    70. case "$type" in
    71. L) ln -s $arg1 /$1/$name ;;
    72. D) mkdir -p /$1/$name ;;
    73. M) mknod -m 600 /$1/$name $arg1 ;;
    74. *) echo "links.conf: unparseable line ($type $name $arg1)" >&2 ;;
    75. esac
    76. done
    78. return $ret
    79. }
    81. ##############################################################################
    83. [ -x /sbin/udevd ] || exit 0
    85. PATH="/sbin:/bin"
    87. # defaults
    88. tmpfs_size="2M"
    89. udev_root="/dev"
    91. if [ -e /etc/udev/udev.conf ]; then
    92. . /etc/udev/udev.conf
    93. fi
    96. ##############################################################################
    98. # When modifying this script, do not forget that between the time that the
    99. # new /dev has been mounted and udevadm trigger has been run there will be
    100. # no /dev/null. This also means that you cannot use the "&" shell command.
    102. case "$1" in
    103. start)
    104. if [ -e "$udev_root/.udev/" ]; then
    105. if mountpoint -q $udev_root/; then
    106. TMPFS_MOUNTED=1
    107. else
    108. echo ".udev/ already exists on the static $udev_root!"
    109. fi
    110. fi
    112. echo > /sys/kernel/uevent_helper
    114. if [ -z "$TMPFS_MOUNTED" ]; then
    115. unmount_devpts
    116. mount_tmpfs
    117. else
    118. # and clean up the database of the initramfs udev
    119. rm -rf /dev/.udev/
    120. fi
    122. # /dev/null must be created before udevd is started
    123. if ! make_extra_nodes "$udev_root"; then
    124. COLDPLUG=yes
    125. fi
    126. if [ ! -f "$COLDPLUG_TARBALL" ]; then
    127. COLDPLUG=yes
    128. fi
    130. # if this directory is not present /dev will not be updated by udev
    131. mkdir -p /dev/.udev/db/
    133. echo "Startting the hotplug events dispatcher"
    134. udevd --daemon
    136. mkdir -p /dev/.udev/queue/ /dev/.udev/rules.d/
    138. create_dev_makedev
    140. if [ $COLDPLUG != "no" ]; then
    141. echo "Synthesizing the initial hotplug events"
    142. udevadm trigger
    144. # wait for the udevd childs to finish
    145. echo "Waiting for /dev to be fully populated"
    146. if udevadm settle; then
    147. echo 'done'
    148. else
    149. echo 'timeout'
    150. fi
    151. fi
    153. ;;
    155. stop)
    156. echo "Stopping the hotplug events dispatcher"
    157. start-stop-daemon --stop --name udevd --quiet --oknodo
    158. ;;
    160. restart)
    161. echo "Stopping the hotplug events dispatcher"
    162. start-stop-daemon --stop --name udevd --quiet --oknodo
    164. echo "Startting the hotplug events dispatcher"
    165. udevd --daemon
    166. ;;
    168. reload|force-reload)
    169. udevadm control --reload_rules
    170. ;;
    172. *)
    173. echo "Usage: /etc/init.d/udev {start|stop|restart|reload|force-reload}"
    174. exit 1
    175. ;;
    176. esac
    178. exit 0
    Alles anzeigen


    welche original ist an
    "Wer schweigt, stimmt nicht immer zu. Er hat nur manchmal keine Lust mit Idioten zu diskutieren."
    Albert Einstein

  • wenn du das vorhandene wieder reinmachst geht es doch wieder nicht :(

    warum machst du nicht einfach ein diff zwischen den beiden dann siehst du das ich ausser das --oknodo rausschmeißen und einen unnötigne if zweig eh nichts geändert habe - und das diff kann man dann im CVS des originalen commiten.

    Man kann halt nicht einfach ein script aus dem Debian klauen sondern muss auf die reduzierten Fähigkeiten der busybox Rücksicht nehmen.

    LG
    gutemine
    Bad mood, bad manners, bad Plugins, you have been warned :whistling:

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von gutemine ()

  • Original von gutemine
    so testet man auch keine enigma2 plugins von denen man nicht weis ob sie funktioniere !

    init 4
    ipkg install /tmp/plugin.ipk
    enigma2
    wenn das enigma2 dann nicht startet fixed man entweder das problem oder macht
    ipkg remove plugin

    Sonst bist du ohne bootmanager aufgeschmissen und kannst nur mehr von vorne anfangen (na ja man kann das BA device rausnehmen, vom flash booten ein /noba directory im Flash anlegen, damit mit BA vom Flash booten und das image löschen/reparieren, /noba directory wieder entfernen)


    /noba directory im Flash anlegen, damit mit BA vom Flash booten und das image löschen/reparieren, /noba directory wieder entfernen

    wie mach ich das ???

  • na ja ich habe die if abfrage nur auskommentiert, theoretisch kann man die ganz rausschmeißen steht eh nichts wichtiges drinnen.

    Das Problem ist halt wenn du udev nicht sauber stoppen kannst geht kein device formatieren und auch kein filesystemcheck (geht alles böse aus weil udev wieder mountet während es läuft) - insofern gehört das dringend gefixed - auch im standard CVS.

    Und das --oknodo ist eh unnötig weil alles als root läuft und der status eh keinen interessiert (wenn es halt eh schon gestoppt wurde und man ./uddev stop 2x ausführt)

    LG
    gutemine

    PS: und ein noba directory kann man in telnet anlegen mit mkdir /noba (und nachher rmdir /noba) oder mit jedem FTP client geht das auch.
    Bad mood, bad manners, bad Plugins, you have been warned :whistling:

    Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von gutemine ()

  • Original von gutemine

    LG
    gutemine

    PS: und ein noba directory kann man in telnet anlegen mit mkdir /noba (und nachher rmdir /noba) oder mit jedem FTP client geht das auch.


    hab es per telnet gemacht - mkdir und rmdir ausgeführt - bootet aber nur das flash image