Hallo,
Ich habe ende November eine Solo2 und eine WD 1TB WD10JPVX Blue 5400 SA3 gekauft.
Die Festplatte ging nach einem Tag nicht mehr. Im Linux log (/var/log/messages) waren
hunderte von Fehlermeldungen mit Lesefehlern.
Ich habe die Platte zurückgeschickt.
Mit der Ersatzplatte war es genau das selbe. Ich konnte sie formatieren und einige zig Gigabyte Filme draufkopieren. Am nächsten Tag war sie kaputt. Es konnten keine Daten mehr gelesen werden.
Die Platte konnte nicht mehr gemounted werden.
Ich habe die SMART Daten angehängt.
Gibt es noch jemand mit dieser Festplatte. Vertägt sich die WD Platte nicht mit der Solo2 oder ist meine Solo2 defekt? Eine alte 160-Gb Western Digital lief ca. 3 Wochen ohne Probleme.
Vielen Dank,
Lepton
Alles anzeigen
Ich habe ende November eine Solo2 und eine WD 1TB WD10JPVX Blue 5400 SA3 gekauft.
Die Festplatte ging nach einem Tag nicht mehr. Im Linux log (/var/log/messages) waren
hunderte von Fehlermeldungen mit Lesefehlern.
Ich habe die Platte zurückgeschickt.
Mit der Ersatzplatte war es genau das selbe. Ich konnte sie formatieren und einige zig Gigabyte Filme draufkopieren. Am nächsten Tag war sie kaputt. Es konnten keine Daten mehr gelesen werden.
Die Platte konnte nicht mehr gemounted werden.
Ich habe die SMART Daten angehängt.
Gibt es noch jemand mit dieser Festplatte. Vertägt sich die WD Platte nicht mit der Solo2 oder ist meine Solo2 defekt? Eine alte 160-Gb Western Digital lief ca. 3 Wochen ohne Probleme.
Vielen Dank,
Lepton
Quellcode
- root@vusolo2:/proc# smartctl -a /dev/sda
- smartctl 5.42 2011-10-20 r3458 [mips-linux-3.3.8-2.0] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD10JPVX-60JC3T0
- Serial Number: WD-WX11E83AT938
- LU WWN Device Id: 5 0014ee 603f569d1
- Firmware Version: 01.01A01
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: ACS-2 (revision not indicated)
- Local Time is: Thu Dec 26 11:52:19 2013 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (17760) seconds.
- Offline data collection
- capabilities: (0x51) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 199) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 182 182 021 Pre-fail Always - 1891
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 16
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7
- 10 Spin_Retry_Count 0x0033 100 253 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 2120
- 188 Command_Timeout 0x0032 001 001 000 Old_age Always - 1071
- 190 Airflow_Temperature_Cel 0x0022 060 055 040 Old_age Always - 40 (Min/Max 40/45)
- 191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 1
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2
- 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 69
- 194 Temperature_Celsius 0x0022 107 102 000 Old_age Always - 40
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
- 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 7 64
- # 2 Short offline Completed: read failure 90% 6 64
- # 3 Short offline Completed: read failure 90% 6 64
- # 4 Short offline Aborted by host 70% 6 -
- # 5 Short offline Aborted by host 10% 6 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von lepton ()