Angepinnt Satip

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Das mit dem Transkodieren und vtuner ist die Einschränkungdurch die Hardware die ich vorher angesprochen hatte.

      Wenn, dann solltest Du das git überprüfen, die Mailinglist informiert nicht über jeden commit.

      Oder Du liest das GIT über RSS
    • Murnau schrieb:

      jetzt bin ich ja mal gespannt auf die Dual-DVB-C Tuner, beim Boardsponsor finde ich noch keinen

      Gruß

      Murnau

      Eigentlich OT aber Ist etwa ein Dual DVB-C Tuner in Planung?
      The next step is done
    • Edit M;oderation: Bitte keine Komplkettzitate des unmittelbar vorausgehenden Beitrags

      Eigentlich OT aber Ist etwa ein Dual DVB-C Tuner in Planung?[/quote]
      Das würde mich auch brennend interessieren. Wenn ja, dann vor allem wo und wann erhältlich.
    • Hallo zusammen,

      es ist soweit. D:

      Das fertige Paket zum Installieren findet Ihr hier:
      github.com/ferranti-dvb/satip-…lient_1.0-r0_mips32el.ipk

      Das bitbake-Recipe mit dem Source Code befindet sich hier:
      github.com/ferranti-dvb/satip-…aster/satip-client-recipe
      Ich habe das Recipe hierhin kopiert: "meta-openvuplus/recipes-vuplus/satip-client"
      Und dann in "meta-openvuplus/recipes-vuplus/tasks/task-vuplus-base.inc" unter dem "usbtunerhelper \" mit "satip-client \" eingebunden.

      Nach der Installation des obigen "satip-client_1.0-r0_mips32el.ipk" einfach die Konfiguration unter /etc/satip-client.conf bearbeiten und dann die Box neu starten bzw. "/etc/init.d/satip-client start" und dann "enigma2" neu starten.
      Jetzt sollte unter "/proc/bus/nim_sockets" die korrekte Anzahl an Tunern erscheinen.
      Diese Tuner können dann in der GUI aktiviert werden.

      Getested habe ich es hier mit einer VU+SoloSE und einem Octopus Net (2x DVB-C) über eine Devolo Powerline (dLAN 1200+) Verbindung.

      Known Issues:
      * aktuell noch Probleme mit mehr als einem Tuner. Zur Not in der /etc/satip-client.conf auf einen Tuner beschränken.
      * USB-Tuner sollten nicht angeschlossen sein, da der "usbtunerhelper" sonst mit dem "satip-client" kollidiert.
      * automatischer Sendersuchlauf ist nicht möglich. Manueller Suchlauf sollte gehen.
      * DVB-S2 ungetestet, da kein SAT hier
      * DVB-T ungetestet
      * Fritz!WLAN Repeater DVB-C funktioniert aktuell noch nicht. Keine Ahnung warum. Vermutlich Abweichungen im RTSP Protokoll.



      Viel Spass damit!
    • Bedankt! :D
      checking for long long... yes<br>
      checking for long double... yes<br>
      +++ Divide By Cucumber Error. Stopping. +++<br><br>
    • Die einzigen Lösungen bzgl. DVB-C und DVB-T, die mir bekannt sind:
      * Octopus Net (Twin Tuner DVB-C/T(2)) für ca. 300EUR
      * Fritz!WLAN Repeater DVB-C (Twin Tuner DVB-C) für ca. 99EUR
      * Software-Lösung: DVBViewer Pro mit Recording Service, dort dann unter dem Punkt "RTSP Server" zu finden. Setzt dann entsprechende DVB-HW unter Windows voraus.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Ferranti ()

    • Danke für die tolle app.

      Endlich hat man die Möglichkeit seiner vu+ auf einfache Weise mehr tuner zu geben, super app.

      Habe das ganze mit einem GSS Satip Server (4 x dvbs2) ausprobiert.

      Habe der solo2 nur einen tuner hinzugefügt bekomme aber trotzdem nur ein schwarzes Bild.

      Der tuner ist aktiv und wird auch verwendet (2 Aufnahmen gestartet um die anderen tuner auszulasten) und die box schaltet um aber kein Bild.

      Was kann ich noch ändern/ einstellen damit es klappt?

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Slow!runner ()

    • Edit hgdo: unnötiges Zitat entfernt

      Hi!

      Hast Du den Tunertyp in der Config-Datei auch auf SAT gestellt?

      Ich habe leider kein SAT, daher konnte ich das nicht testen. Es könnte sein, dass die Umgestaltung etwas kaputt gemacht hat bei SAT.
      Ruf den Client doch einfach mal manuell auf. Vorher natürlich erst "/etc/init.d/satip-client stop".

      Dann siehst Du mit "-l 4" als Option ganz viel Debug-Output. Hier solltest Du gucken, wie der http-Aufruf an den Server aussieht (SETUP- bzw. PLAY-Request).
      Den dann einfach mal mit VLC vom PC aus testen. Evtl. wird die URL falsch zusammengebaut.
    • also mein satip server mit 4 tunern hat 129,-€ gekostet und das kann man dafür nicht als teuer bezeichen.

      Wenn das bei der solo2 klappen sollte hat man also hinterher vielleicht mal 6 tuner die man benutzen kann und das ist schon recht komfortabel.
    • Es geht hier nicht um Dualtuner sondern darum das in Zukunft keine Coaxkabel mehr verlegt werden da das TV-Signal über die ohnehin vorhanden LAN Infrastruktur verteilt wird.
      Da kannst du dir 4 Dualtuner mit 8 Eingängen in die Box bauen, wenn du 8 mal kein Coax Kabel anschließt kommt 8 mal nichts raus dabei.
      The next step is done
    • Thank you for this great news

      I'm going to test my Solo2 and Octoplus with 2 tuners DVB-S2 and DVB-T

      Kinds regards from Barcelona
      VDR1: ASRock H77M - i3-3220 CPU @ 3.30GHz , 4 GB Ram - MSI GT620 - 128 GB SSD - 500 GB 3,5" HD - Silverstone Milo ML03 - Pearl DPF - DD Cine S2 V6 - DuoFlex C/T - Hama MCE Remote, YaVDR 0.5

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von gabychan ()

    • I have been in doubt

      Works with encrypted channels Oscam in Vdr use the plugin-dvbapi

      Thank you again

      Kinds regars
      VDR1: ASRock H77M - i3-3220 CPU @ 3.30GHz , 4 GB Ram - MSI GT620 - 128 GB SSD - 500 GB 3,5" HD - Silverstone Milo ML03 - Pearl DPF - DD Cine S2 V6 - DuoFlex C/T - Hama MCE Remote, YaVDR 0.5

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von gabychan ()

    • Habe versucht mit dem start und stop bzw. -l4 hinter dem start Befehl zu sehen was passiert, aber ich sehe nur das er den <dienst startet oder stoppt aber nicht das er irgend einen Fehler oder sonst was ausgibt. Wo finde ich diese Logdatei oder die Ausgabe der Fehler?

      Ich habe von Linux keine Ahnung und der ganzen Handhabung.

      Ich bekomme jednfalls kein Bild!

      Was kann ich noch falsch machen?

      Zur Prüfung ob ich ein Bild bekomme starte ich immer 2 Aufnahmen und schalte dann noch auf einen Kanl in einem dritten Transponder, aber er schaltet um, es gibt aber kein Bild.
    • Das habe ich jetzt angezeigt bekommen!!



      Spoiler anzeigen
      [3358 satip_main.c:104] debug: Pages locked
      [3358 satip_main.c:111] debug: Realtime scheduling enabled at prio 1
      [3358 satip_vtuner.c:228] info: Frontend type: DVB-S2, name: SAT>IP DVB-S2 NIM
      [3358 satip_config.c:235] debug: Status 0100
      [3358 satip_rtp.c:226] info: rtp/rtcp port 45288/45289
      [3358 satip_rtp.c:117] debug: RTP: Realtime scheduling enabled at prio 2
      [3358 satip_vtuner.c:410] debug: MSG_SET_TONE: OFF = low band
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:532] debug: MSG_READ_BER
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 512
      [3358 satip_vtuner.c:486] debug: 511
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:486] debug: 17
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:532] debug: MSG_READ_BER
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:566] debug: MSG_SET_PROPERTY
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_config.c:235] debug: Status 0101
      [3358 satip_config.c:235] debug: Status 0141
      [3358 satip_config.c:235] debug: Status 01c1
      [3358 satip_config.c:235] debug: Status 01c9
      [3358 satip_vtuner.c:363] debug: MSG_SET_FRONTEND freq: 112205 symrate: 27500000
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:532] debug: MSG_READ_BER
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:532] debug: MSG_READ_BER
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:522] debug: MSG_READ_STATUS
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:532] debug: MSG_READ_BER
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:542] debug: MSG_READ_SNR
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:537] debug: MSG_READ_SIGNAL_STRENGTH
      [3358 satip_vtuner.c:592] debug: ioctl: response ok
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 1280
      [3358 satip_vtuner.c:486] debug: 32
      [3358 satip_vtuner.c:486] debug: 32
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 32
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 0
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 20
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 18
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57
      [3358 satip_vtuner.c:517] debug: set_pidlist: no response required
      [3358 satip_vtuner.c:478] debug: MSG_SET_PIDLIST:
      [3358 satip_vtuner.c:486] debug: 211
      [3358 satip_vtuner.c:486] debug: 561
      [3358 satip_vtuner.c:486] debug: 57


      edit by shadowrider: bitte auf Lesbarkeit achten, hab das mal in Spoiler gepackt...
    • * Known Issues:
      * aktuell noch Probleme mit mehr als einem Tuner. Zur Not in der /etc/satip-client.conf auf einen Tuner beschränken.
      * USB-Tuner sollten nicht angeschlossen sein, da der "usbtunerhelper" sonst mit dem "satip-client" kollidiert.
      * automatischer Sendersuchlauf ist nicht möglich. Manueller Suchlauf sollte gehen.
      * DVB-S2 ungetestet, da kein SAT hier
      * DVB-T ungetestet



      I can tell you that the DVB-S2 works perfectement

      what is not working the way I have DVB-T is connected to the Octopus.

      If you can help me say

      Kinds regards
      VDR1: ASRock H77M - i3-3220 CPU @ 3.30GHz , 4 GB Ram - MSI GT620 - 128 GB SSD - 500 GB 3,5" HD - Silverstone Milo ML03 - Pearl DPF - DD Cine S2 V6 - DuoFlex C/T - Hama MCE Remote, YaVDR 0.5