VMC Anleitungs und Fragethread

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Moin

      Seit ca. einer Woche werden absolut keine Cover mehr angezeigt ! Weiß jemand wieso und was ich dagegen machen kann ?

      Habe eine solo 4K mit allen updates und alles auf dem neusten stand

      Danke euch

    • Habe es im Standard Pfad, der von Anfang an da war.. meine Filme liegen auf meinem nas

      Es funktioniert sonst alles einwandfrei

    • Diese netten Kommentare immer...

      Ich kann den genauen Pfad gerade nicht sagen da ich mich daheim bin und daher auch die Aussage das es der Standart Pfad ist !

      Edit hier ein Screenshot
      Dateien

      • IMG_0077.PNG

        (227,47 kB, 45 mal heruntergeladen, zuletzt: )

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von pillemats ()

    • Genau. Die Frage, ob die Imagedatei für die Bilder erreichbar ist, wurde ja immer noch nicht beantwortet.

      Oder du guckst einfach auf deinem USB-Stick, ob da die Datei VMCArt.img vorhanden ist.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Knifte ()

    • sie war nicht erreichbar.... warum auch immer... der usb steckte drin und nach einem kompletten neustart musste ich ihn neu einhängen ! nun bgeht alles wieder

      besten dank !

    • Hallo. Bin stolzer Besitzer der Ultimo 4K.
      VMC ließ sich erst nicht richtig installieren
      (I/O error). Dann VMC deinstalliert und Settings Einträge gelöscht. Es Lässt sich jetzt konfigurieren mit dem Neustart am Ende. Aber GUI startet immer Neu, wenn ich VMC starte. Jemand ein Tipp?

      VTI immer aktuell

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Onkel_Jo ()

    • Hmmm auch ich habe derzeit ein Problem... Und zwar wird mir der Reiter "Serien" nicht angezeigt?! Die Suchpfade hab ich richtig angegeben (Filme, Serien und Musik jeweils einen eigenen Suchpfad), aktiviert und VMC findet auch alles bis auf "Serien". Die werden weiterhin unter Filme angezeigt. Gibts da einen Lösungsvorschlag?

    • Bei den Suchpfaden als Ordnerinhalt auch Serien ausgewählt?
      Hard-Software
      2x VU+ Solo4k
      VU+ Zero
      Samsung UE65JU7090 4kUHD
      Teufel Impaq 7300M
      Samsung SPF-107h
      Netatmo
      HD+ HD02
      Hyperion
      -------------------------
      VTi 11.0.x
      Fluid Skin
      VMC
      AutomaticFullBackup
      Serienrecorder
      Netatmo
      LCD4Linux
      MQB
      EMC
      OScam 1.20 rev: 11277
      OscamButler

      Use Filebot!

    • morgen,

      habe meien 4k gerade komplett neu aufgesetzt + alle updates gemacht
      es wurde NUR VMC und Fluid next installiert
      es ist ein USB Stick (hinten) eingesteckt (ist erkannt + eingehangen)

      beim Erstaufruf vom VMC (assi) habe ich entsprechende die EInstellungen gemacht, Mastbox, usb stick etc.

      Box wurde neu gestartet.

      Beim Aufruf vom VMC erscheint die Meldung: List index out of range
      die crash log datei ist leer...

      jemand eine Idee ??!?

    • Hab mein Problem soweit gelöst, dass VMC Startet. Aber sobald ich mit Exit beende,GUI Neustart.

      Hier mein Log:
      Spoiler anzeigen
      otf...OK (SemiboldLCDit)
      23:28:06.712 [e2-core] couldn't open /proc/stb/misc/12V_output
      23:28:06.712 [e2-core] resolve: resolve ${datadir}/enigma2/keymap.xml
      23:28:06.713 [e2-core] resolve: -> /usr/share/enigma2/keymap.xml
      23:28:06.778 [e2-core] resolve: resolve ${datadir}/keymaps/
      23:28:06.779 [e2-core] resolve: -> /usr/share/keymaps/
      23:28:06.780 [e2-core] resolve: resolve ${datadir}/keymaps/
      23:28:06.781 [e2-core] resolve: -> /usr/share/keymaps/
      23:28:06.783 [e2-core] resolve: resolve ${datadir}/keymaps/
      23:28:06.783 [e2-core] resolve: -> /usr/share/keymaps/
      23:28:06.786 [e2-python] Activating keymap: Keyboard Deutsch
      23:28:06.787 [e2-core] resolve: resolve ${datadir}/keymaps/
      23:28:06.787 [e2-core] resolve: -> /usr/share/keymaps/
      23:28:06.788 [e2-python] Activating language German
      23:28:06.968 [e2-python] language set to de_DE
      23:28:06.971 [e2-core] FIXME: request for unknown slot
      23:28:06.972 [e2-core] FIXME: request for unknown slot
      23:28:06.973 [e2-core] setLCDBrightness 25
      23:28:07.023 [e2-core] setLCDBrightness 25
      23:28:07.104 [e2-core] cannot open /proc/stb/avs/0/input_choices
      23:28:07.107 [e2-python] --> setting scaler_sharpness to: 00000000
      23:28:07.125 [e2-python] [NetworkBrowser] fallback to default translation for NetworkBrowser
      23:28:07.127 [e2-python] [NetworkBrowser] fallback to default translation for Search for network shares
      23:28:07.128 [e2-python] [NetworkBrowser] fallback to default translation for MountManager
      23:28:07.129 [e2-python] [NetworkBrowser] fallback to default translation for Manage network shares
      23:28:07.145 [e2-core] resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
      23:28:07.146 [e2-core] resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
      23:28:07.150 [e2-python] [DeviceManager2] Loading skin /usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/skin.xml
      23:28:07.155 [e2-python] remove DVI-PC because it does not exist.
      23:28:07.156 [e2-python] remove Scart because it does not exist.
      23:28:07.157 [e2-python] remove YPbPr because it does not exist.
      23:28:07.159 [e2-python] set HDMI Colorspace : Edid(Auto)
      23:28:07.160 [e2-python] set HDMI Colordepth : auto
      23:28:07.259 [e2-python] hotplug on DVI
      23:28:07.261 [e2-python] set Videomode DVI 1080i multi
      23:28:07.376 [e2-python] set aspect, policy, policy2, wss 16:9 panscan letterbox auto
      23:28:07.528 [e2-core] resolve: resolve ${datadir}/enigma2/
      23:28:07.529 [e2-core] resolve: -> /usr/share/enigma2/
      23:28:07.531 [e2-core] resolve: resolve ${datadir}/enigma2/
      23:28:07.531 [e2-core] resolve: -> /usr/share/enigma2/
      23:28:07.534 [e2-python] <RemoteControlCode> Write Remote Control Code : 2
      23:28:07.801 [e2-core] /usr/lib/enigma2/python/Plugins/Extensions/BoxPirates_Panel/BoxPirates.png: 100x40x16 png, 6
      23:28:08.465 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/PVR_State.ttf...OK (MPVR)
      23:28:08.466 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/vmclogo.ttf...OK (LOGO)
      23:28:08.467 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/RC.ttf...OK (VRegular)
      23:28:08.467 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/RobotoCondensed-Bold.ttf...OK (VBold)
      23:28:08.468 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/RobotoCondensed-Light.ttf...OK (VLight)
      23:28:08.468 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/fontawesome.ttf...OK (Icons)
      23:28:08.469 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/VMCIcons.ttf...OK (VMCIcons)
      23:28:08.469 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/UFC.ttf...OK (UFC)
      23:28:08.469 [e2-core] [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/VMC/fonts/IconFonts/Material-Design-Icons.ttf...OK (VMCMaterializeIcons)
      23:28:08.589 [e2-python] [LCD4linux] libusb found :) 2017-04-10-vti-master (1881f27)
      23:28:08.781 [e2-core] main thread is non-idle! display spinner!
      23:28:09.579 [e2-python] ('[MediaPortal] fallback to default translation for', 'Wall')
      23:28:09.593 [e2-python] ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      23:28:09.601 [e2-python] ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      23:28:09.606 [e2-python] ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      23:28:09.608 [e2-python] ('[MediaPortal] fallback to default translation for', 'EPG/INFO')
      23:28:10.150 [e2-python] ('[MediaPortal] fallback to default translation for', 'GENRES')
      23:28:10.468 [e2-python] starting hotplug handler
      23:28:10.471 [e2-python] add device sdb to bdpoll current state: medium inserted
      23:28:10.472 [e2-core] Setvolume: 100 100 (raw)
      23:28:10.473 [e2-core] Setvolume: 0 0 (-1db)
      23:28:10.473 [e2-python] [MultiQuickButton] enabled: True
      23:28:10.482 [e2-python] Looking for embedded skin
      23:28:10.491 [e2-python] [AutoShutDown] start....
      23:28:10.492 [e2-core] [Animation] set animation mode 1
      23:28:10.493 [e2-python] [Vu+MiscControl] set /proc/stb/frontend/fbc/force_lnbon : off
      23:28:10.493 [e2-python] [Vu+MiscControl] proc write Error [Errno 2] No such file or directory: '/proc/stb/frontend/fbc/force_lnbon'
      23:28:10.494 [e2-python] [Vu+MiscControl] set /proc/stb/frontend/fbc/force_toneburst : disable
      23:28:10.494 [e2-python] [Vu+MiscControl] proc write Error [Errno 2] No such file or directory: '/proc/stb/frontend/fbc/force_toneburst'
      23:28:10.495 [e2-python] [Vu+MiscControl] set /proc/stb/tsmux/rmx_delay : 256
      23:28:10.536 [e2-python] >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      >
      <
      23:28:10.537 [e2-python]
      23:28:10.538 [e2-python] /media/net/autofs
      23:28:10.538 [e2-python] /media/net/autonet
      23:28:10.543 [e2-python] {'/media/VMC': 'cifs//192.168.1.3/VMC', '/media/hdd': 'cifs//192.168.1.3/Harddisk', '/var': 'cifs//192.168.1.3/Configuration'}
      23:28:10.668 [e2-python] [92m[EPG Share] INITIALIZING EPGSHARE AUTOUPDATETIMER[0m
      23:28:10.669 [e2-python] [92m[EPG Share] Nächstes Auto EPG Update startet in 1231 min. um 20:00 Uhr.[0m
      23:28:10.670 [e2-python] [MultiQuickButton] enabled: True
      23:28:10.729 [e2-python] [MediaInfo] READ OLD JOBS !!!
      23:28:10.892 [e2-core] [eEPGCache] disable Vu+ DVB EPG blacklist mode
      23:28:11.188 [e2-core] [eEPGCache] set Vu+ in EPG-server (default) mode
      23:28:11.191 [e2-core] [eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      23:28:11.191 [e2-core] [eEPGCache] time updated.. start EPG Mainloop
      23:28:11.191 [e2-core] before: 1
      23:28:11.192 [e2-core] after: 1
      23:28:11.193 [e2-core] [eEPGCache] create epg.dat backup
      23:28:11.291 [e2-core] [eEPGCache] service reference for epg query is not valid
      23:28:11.465 [e2-core] [eEPGCache] service reference for epg query is not valid
      23:28:11.806 [e2-python] warning, skin is missing element etitle in <class 'Screens.ChannelSelection.ChannelSelection'>
      23:28:11.808 [e2-python] warning, skin is missing element searchchar in <class 'Screens.ChannelSelection.ChannelSelection'>
      23:28:11.891 [e2-python] RemovePopup, id = ZapError
      23:28:12.168 [e2-python] setValue 100
      23:28:12.235 [e2-core] Setvolume: 100 100 (raw)
      23:28:12.237 [e2-core] Setvolume: 0 0 (-1db)
      23:28:12.266 [e2-python] playing service..
      23:28:12.268 [e2-core] allocate channel.. 271f:f001
      23:28:12.271 [e2-core] Slot 0, score 2
      23:28:12.273 [e2-core] Slot 1, score 2
      23:28:12.460 [e2-core] Slot 2, score 2
      23:28:12.600 [e2-core] Slot 3, score 2
      23:28:12.765 [e2-core] Slot 4, score 2
      23:28:12.766 [e2-core] Slot 5, score 2
      23:28:12.766 [e2-core] Slot 6, score 2
      23:28:12.768 [e2-core] Slot 7, score 2
      23:28:12.768 [e2-core] opening frontend 0
      23:28:12.770 [e2-core] [eDVBCAService] new channel 0x15ba6b0!
      23:28:12.771 [e2-core] (0)tune
      23:28:12.771 [e2-core] tuning to 346000 khz, sr 6900000, fec 0, modulation 5, inversion 2
      23:28:12.772 [e2-core] OURSTATE: tuning
      23:28:12.773 [e2-core] allocate Channel: res 0
      23:28:12.773 [e2-core] allocate demux
      23:28:12.774 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      23:28:12.775 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      23:28:12.776 [e2-core] [eDVBServiceFCCPlay::changeFCCMode][1:0:19:C35C:271F:F001:FFFF0000:0:0:0:] enable FCC decoding.
      23:28:12.932 [e2-core] [eEPGCache] 54002 events read from /hdd/epg.dat
      23:28:12.939 [e2-core] [eEPGCache] create real epg.dat backup
      23:28:12.961 [e2-python] not pauseable.
      23:28:12.961 [e2-python] RemovePopup, id = ZapError
      23:28:13.066 [e2-core] [SEC] startTuneTimeout 5000
      23:28:13.071 [e2-core] resolve: resolve ${sysconfdir}/enigma2/ci
      23:28:13.072 [e2-core] resolve: -> /etc/enigma2/ci
      23:28:13.073 [e2-core] resolve: resolve ${sysconfdir}/enigma2/ci
      23:28:13.074 [e2-core] resolve: -> /etc/enigma2/ci
      23:28:13.098 [e2-core] [SEC] setFrontend 1
      23:28:13.099 [e2-core] setting frontend 0
      23:28:13.100 [e2-core] child has terminated
      23:28:13.100 [e2-core] pipes closed
      23:28:13.108 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      23:28:13.108 [e2-core] child has terminated
      23:28:13.109 [e2-core] pipes closed
      23:28:13.123 [e2-core] child has terminated
      23:28:13.125 [e2-core] pipes closed
      23:28:13.127 [e2-core] child has terminated
      23:28:13.128 [e2-core] pipes closed
      23:28:13.129 [e2-core] child has terminated
      23:28:13.130 [e2-core] pipes closed
      23:28:13.141 [e2-core] child has terminated
      23:28:13.143 [e2-core] pipes closed
      23:28:13.156 [e2-core] child has terminated
      23:28:13.157 [e2-core] pipes closed
      23:28:13.159 [e2-core] child has terminated
      23:28:13.160 [e2-core] pipes closed
      23:28:13.161 [e2-python] 0.0.0.0
      23:28:13.162 [e2-python] 169.254
      23:28:13.162 [e2-python] 192.168
      23:28:13.175 [e2-python] nameservers: [[192, 168, 1, 1]]
      23:28:13.176 [e2-python] read configured interface: {'lo': {'dhcp': False}, 'wlan3': {'dhcp': True}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 3]}}
      23:28:13.177 [e2-python] self.ifaces after loading: {'wlan3': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'dns-nameservers': False, 'mac': '00:90:4c:11:22:33', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 3], 'up': True, 'dns-nameservers': '\tdns-nameservers 192.168.1.1\n', 'mac': '00:1d:ec:10:55:66', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
      23:28:16.012 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      23:28:16.013 [e2-core] OURSTATE: ok
      23:28:16.013 [e2-core] [eDVBCAService] channel 0x15ba6b0 running
      23:28:16.013 [e2-core] [eDVBLocalTimerHandler] channel 0x15ba6b0 running
      23:28:16.014 [e2-core] no version filtering
      23:28:16.014 [e2-core] 0014: 70 00 00 00 00 00
      23:28:16.014 [e2-core] mask: fc 00 00 00 00 00
      23:28:16.015 [e2-core] mode: 00 00 00 00 00 00
      23:28:16.016 [e2-core] [eEPGCache] channel 0x15ba6b0 running
      23:28:16.017 [e2-core] [eEPGCache] next update in 2 sec
      23:28:16.017 [e2-core] stop release channel timer
      23:28:16.019 [e2-core] no version filtering
      23:28:16.020 [e2-core] 0012: 4e c3 5c 00 00 00
      23:28:16.021 [e2-core] mask: ff ff ff 00 00 00
      23:28:16.021 [e2-core] mode: 00 00 00 00 00 00
      23:28:16.023 [e2-core] ok ... now we start!!
      23:28:16.024 [e2-core] no version filtering
      23:28:16.025 [e2-core] 0000: 00 00 00 00 00 00
      23:28:16.026 [e2-core] mask: ff 00 00 00 00 00
      23:28:16.026 [e2-core] mode: 00 00 00 00 00 00
      23:28:16.027 [e2-core] eventNewProgramInfo 0 0
      23:28:16.027 [e2-core] [eDVBServiceFCCPlay::updateFCCDecoder][1:0:19:C35C:271F:F001:FFFF0000:0:0:0:]
      23:28:16.028 [e2-core] have 1 video stream(s) (19f1), and 1 audio stream(s) (19f2), and the pcr pid is 19f1, and the text pid is 19f4 (Cached)
      23:28:16.028 [e2-core] allocate demux
      23:28:16.043 [e2-core] [eFCCDecoder] scanning for FCC device files..
      23:28:16.043 [e2-core] [eFCCDecoder] /dev/fcc0 found..
      • 23:28:16.044 [e2-core] [eFCCDecoder] [/spoiler]