Gelöst: freeze bei Wiedergabe

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Gelöst: freeze bei Wiedergabe

      Hallo, kann sich jemand dieses Verhalten erklären: bei der Wiedergabe einer Aufnahme friert die Box reproduzierbar ein wenn ich mehrmals schnell hintereinander vorwärts/rückwärts springe.

      Dabei friert zuerst das Bild ein, dann nach wenigen Sekunden auch der Ton. Die Box reagiert nicht mehr auf die FB, eine parallel laufen de ssh Session ist auch tot. Nur noch ein Powercycle bringt die Box zurück. Crashlog wird nicht erzeugt.

      Kurz vor dem freeze sieht für mich alles normal aus: mindestens 70% freier Speicher, der enigma Prozess zieht nicht mehr als 50-60% CPU

      Erstmals aufgetreten ist das Problem vor 1-2 Tagen. Zu der Zeit hatte ich nur die aktuellen Updates installiert (aktueller Stand: 9.8.2016). Letzte Plugin-Installation war ein Update von Serienrecorder von 3.2.5 auf 3.2.6 vor etwa einem halben Jahr.

      Wie gesagt: das Verhalten ist reproduzierbar, mit beliebigen, neueren oder älteren Aufnahmen. "Früher" gab es keine Probleme - ich habe damit bei Aufnahmen regelmässig durch schnelles Springen die Werbung übersprungen und nie einen freeze oder crash gehabt.

      Platte ist knapp 50% voll, USB-Stick ist nicht dran.

      Hat jemand einen Vorschlag wie ich das Problem weiter eingrenzen kann - oder gar eine Lösung dafür?

      Schönen Gruss,
      Stefan
    • Gibt's ein Crashlog?

      Edit: ahh, steht ja da ..


      ;rolleyes: Anfänger machen Fehler - Könner verursachen Katastrophen ;_)

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von caju ()

    • freeze bei Wiedergabe

      Hab mal ein debug file erzeugt während eines freeze:

      leider kann ich damit nichts anfangen
      Spoiler anzeigen
      21:42:54.686 [e2-core] [VTi] version: 9.0.3 --> build: 2016-07-28 (d75da0c) | vti-master
      21:42:57.404 [e2-core] main thread is non-idle! display spinner!
      21:43:06.605 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:06.648 [e2-python] action -> WizardActions up
      21:43:06.661 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:06.702 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:06.741 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:06.876 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:08.622 [e2-python] action -> WizardActions down
      21:43:09.348 [e2-python] action -> WizardActions ok
      21:43:09.348 [e2-python] unknown action WizardActions/ok! typo in keymap?
      21:43:09.349 [e2-python] action -> OkCancelActions ok
      21:43:20.178 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:20.321 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:20.485 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:20.652 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:20.867 [e2-python] [VTI HDMI-CEC] received cec message 27 from 0
      21:43:35.251 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:35.415 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:35.583 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:35.750 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:35.965 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:38.000 [e2-python] next real activation is Fri Aug 12 00:00:01 2016
      21:43:45.000 [e2-python] next real activation is Thu Aug 11 23:56:40 2016
      21:43:50.324 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:50.474 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:50.642 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:50.809 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:43:51.024 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:05.397 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:05.541 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:05.698 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:05.865 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:06.080 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:17.809 [e2-python] action -> SetupActions cancel
      21:44:20.471 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:20.631 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:20.799 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:20.966 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:21.181 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:21.775 [e2-python] action -> WizardActions back
      21:44:21.776 [e2-python] unknown action WizardActions/back! typo in keymap?
      21:44:21.777 [e2-python] action -> OkCancelActions cancel
      21:44:23.704 [e2-python] action -> WizardActions up
      21:44:24.236 [e2-python] action -> WizardActions ok
      21:44:24.237 [e2-python] unknown action WizardActions/ok! typo in keymap?
      21:44:24.237 [e2-python] action -> OkCancelActions ok
      21:44:24.243 [e2-python] EMPTY: 0
      21:44:24.244 [e2-python] ENABLE: 1
      21:44:24.244 [e2-python] DISABLE: 2
      21:44:24.245 [e2-python] CLEANUP: 3
      21:44:24.245 [e2-python] DELETE: 4
      21:44:24.274 [e2-python] key_red_choice: 0
      21:44:32.473 [e2-python] action -> OkCancelActions cancel
      21:44:34.340 [e2-python] action -> WizardActions back
      21:44:34.341 [e2-python] unknown action WizardActions/back! typo in keymap?
      21:44:34.341 [e2-python] action -> OkCancelActions cancel
      21:44:34.354 [e2-core] decoder state: play, vpid=-1, apid=-1
      21:44:34.354 [e2-core] DEMUX_STOP - pcr - ok
      21:44:34.362 [e2-core] DEMUX_STOP - video - ok
      21:44:34.415 [e2-core] VIDEO_STOP - ok
      21:44:34.416 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:1:1B66:3FC:1:C00000:0:0:0:
      21:44:34.416 [e2-core] demux 0 mask 01 prevhash 02fc0101
      21:44:34.416 [e2-core] [eDVBCAService] don't build/send the same CA PMT twice
      21:44:35.545 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:35.690 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:35.858 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:36.026 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:36.240 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:37.036 [e2-python] action -> InfobarActions showMovies
      21:44:37.185 [e2-python] warning, skin is missing element freeDiskSpace in <class 'Screens.MovieSelection.MovieSelection'>
      21:44:37.188 [e2-python] warning, skin is missing element Cover in <class 'Screens.MovieSelection.MovieSelection'>
      21:44:37.193 [e2-python] warning, skin is missing element DescriptionBorder in <class 'Screens.MovieSelection.MovieSelection'>
      21:44:37.662 [e2-core] before: 1
      21:44:37.662 [e2-core] after: 1
      21:44:37.724 [e2-core] thread joined 0
      21:44:45.526 [e2-core] before: 1
      21:44:45.526 [e2-core] after: 1
      21:44:45.564 [e2-core] thread joined 0
      21:44:46.911 [e2-python] action -> InfobarSeekActions unPauseService
      21:44:46.911 [e2-python] unknown action InfobarSeekActions/unPauseService! typo in keymap?
      21:44:46.912 [e2-python] action -> OkCancelActions ok
      21:44:46.967 [e2-python] not pauseable.
      21:44:46.982 [e2-python] RemovePopup, id = ZapError
      21:44:46.987 [e2-python] playing service..
      21:44:46.988 [e2-core] [eDVBCAService] free slot 1 demux 0 for service 1:0:1:1B66:3FC:1:C00000:0:0:0:
      21:44:46.988 [e2-core] [eDVBCAService] free service 1:0:1:1B66:3FC:1:C00000:0:0:0:
      21:44:47.023 [e2-core] decoder state: play, vpid=-1, apid=-1
      21:44:47.023 [e2-core] DEMUX_STOP - pcr - ok
      21:44:47.024 [e2-core] DEMUX_STOP - video - ok
      21:44:47.025 [e2-core] VIDEO_STOP - ok
      21:44:47.048 [e2-core] AUDIO_STOP - ok
      21:44:47.048 [e2-core] DEMUX_STOP - audio - ok
      21:44:47.048 [e2-core] AUDIO_CONTINUE - ok
      21:44:47.055 [e2-core] start release channel timer
      21:44:47.056 [e2-core] alloc PVR
      21:44:47.057 [e2-core] [eDVBCAService] remove channel 0x1d9e120
      21:44:47.057 [e2-core] [eDVBCAService] write leave transponder failed!!
      21:44:47.057 [e2-core] [eDVBLocalTimerHandler] remove channel 0x1d9e120
      21:44:47.058 [e2-core] [eEPGCache] remove channel 0x1d9e120
      21:44:47.062 [e2-core] allocate demux
      21:44:47.062 [e2-core] loading streaminfo for /media/hdd/movie/Serie/Witches of East End/20160603 2011 - SIXX - Witches of East End - S01E01 - Unheil zie
      ht auf.ts
      21:44:47.097 [e2-core] loading cuts..
      21:44:47.098 [e2-core] 4 entries
      21:44:47.147 [e2-core] before: 1
      21:44:47.148 [e2-core] after: 1
      21:44:47.148 [e2-core] setIoPrio best-effort level 0 ok
      21:44:47.148 [e2-core] FILEPUSH THREAD START
      21:44:47.148 [e2-core] getNextSourceSpan, current offset is 00000000, m_skipmode_m = 0!
      21:44:47.149 [e2-core] NO CUESHEET. (00000000, 10485700)
      21:44:47.149 [e2-core] no version filtering
      21:44:47.149 [e2-core] 0012: 4e 00 00 00 00 00
      21:44:47.150 [e2-core] mask: ff ff ff 00 00 00
      21:44:47.150 [e2-core] mode: 00 00 00 00 00 00
      21:44:47.152 [e2-core] ok ... now we start!!
      21:44:47.152 [e2-core] no version filtering
      21:44:47.153 [e2-core] 0000: 00 00 00 00 00 00
      21:44:47.153 [e2-core] mask: ff 00 00 00 00 00
      21:44:47.153 [e2-core] mode: 00 00 00 00 00 00
      21:44:47.154 [e2-core] eventNewProgramInfo 0 0
      21:44:47.154 [e2-core] have 1 video stream(s) (02ff), and 1 audio stream(s) (0300), and the pcr pid is 02ff, and the text pid is 0023
      21:44:47.160 [e2-core] disable teletext subtitles
      21:44:47.161 [e2-core] decoder state: play, vpid=767, apid=768
      21:44:47.161 [e2-core] DMX_SET_PES_FILTER(0x300) - audio - ok
      21:44:47.161 [e2-core] DEMUX_START - audio - ok
      21:44:47.162 [e2-core] AUDIO_SET_BYPASS(1) - ok
      21:44:47.162 [e2-core] AUDIO_PAUSE - ok
      21:44:47.164 [e2-core] AUDIO_PLAY - ok
      21:44:47.165 [e2-core] Video Device: /dev/dvb/adapter0/video0
      21:44:47.165 [e2-core] demux device: /dev/dvb/adapter0/demux8
      21:44:47.167 [e2-core] VIDEO_SET_STREAMTYPE 0 - ok
      21:44:47.169 [e2-core] DMX_SET_PES_FILTER(0x2ff) - video - ok
      21:44:47.171 [e2-core] DEMUX_START - video - ok
      21:44:47.172 [e2-core] VIDEO_FREEZE - ok
      21:44:47.179 [e2-core] VIDEO_PLAY - ok
      21:44:47.179 [e2-core] DMX_SET_PES_FILTER(0x23) - ttx - ok
      21:44:47.180 [e2-core] DEMUX_START - ttx - ok
      21:44:47.186 [e2-core] VIDEO_SLOWMOTION(0) - ok
      21:44:47.187 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      21:44:47.187 [e2-core] VIDEO_CONTINUE - ok
      21:44:47.190 [e2-core] AUDIO_CONTINUE - ok
      21:44:47.192 [e2-core] eDVBServicePlay::seekTo: jump 0
      21:44:47.192 [e2-core] seek.
      21:44:47.193 [e2-core] stopping thread.
      21:44:47.201 [e2-core] FILEPUSH THREAD STOP
      21:44:47.201 [e2-core] thread joined 0
      21:44:47.242 [e2-core] AUDIO_CLEAR_BUFFER - ok
      21:44:47.248 [e2-core] VIDEO_CLEAR_BUFFER - ok
      21:44:47.248 [e2-core] before: 1
      21:44:47.249 [e2-core] after: 1
      21:44:47.249 [e2-core] setIoPrio best-effort level 0 ok
      21:44:47.249 [e2-core] FILEPUSH THREAD START
      21:44:47.249 [e2-core] getNextSourceSpan, current offset is 01831872, m_skipmode_m = 0!
      21:44:47.250 [e2-core] getOffset for pts 0x0
      21:44:47.250 [e2-core] ok, resolved skip (rel: 0, diff 0), now at 00000000
      21:44:47.250 [e2-core] NO CUESHEET. (00000000, 10485700)
      21:44:47.451 [e2-python] new service started! trying to download cuts!
      21:44:47.453 [e2-python] RemovePopup, id = ZapError
      21:44:47.779 [e2-core] + 1/1 TID 00
      21:44:47.780 [e2-core] done!
      21:44:47.782 [e2-core] PATready
      21:44:47.782 [e2-core] use pmtpid 0063 for service_id 0308
      21:44:47.783 [e2-core] no version filtering
      21:44:47.783 [e2-core] 0063: 02 03 08 00 00 00
      21:44:47.783 [e2-core] mask: ff ff ff 00 00 00
      21:44:47.783 [e2-core] mode: 00 00 00 00 00 00
      21:44:47.785 [e2-core] doing version filtering
      21:44:47.786 [e2-core] 0000: 00 00 00 33 00 00
      21:44:47.789 [e2-core] mask: ff 00 00 3f 00 00
      21:44:47.789 [e2-core] mode: 00 00 00 3e 00 00
      21:44:47.790 [e2-core] ERROR reading PES (fd=74) - Value too large for defined data type
      21:44:47.792 [e2-core] VIDEO_GET_EVENT - ok
      21:44:47.882 [e2-core] before: 1
      21:44:47.883 [e2-core] after: 1
      21:44:47.916 [e2-python] [AutoRes] got event evVideoSizeChanged
      21:44:47.922 [e2-core] + 1/1 TID 02
      21:44:47.933 [e2-core] done!
      21:44:48.063 [e2-core] eventNewProgramInfo 0 0
      21:44:48.064 [e2-core] no version filtering
      21:44:48.064 [e2-core] 0305: 74 00 00 00 00 00
      21:44:48.065 [e2-core] mask: ff 00 00 00 00 00
      21:44:48.065 [e2-core] mode: 00 00 00 00 00 00
      21:44:48.066 [e2-core] have 1 video stream(s) (02ff), and 1 audio stream(s) (0300), and the pcr pid is 02ff, and the text pid is 0023
      21:44:48.067 [e2-core] decoder state: play, vpid=767, apid=768
      21:44:48.071 [e2-core] no version filtering
      21:44:48.071 [e2-core] 0305: 74 00 00 00 00 00
      21:44:48.072 [e2-core] mask: ff 00 00 00 00 00
      21:44:48.072 [e2-core] mode: 00 00 00 00 00 00
      21:44:48.104 [e2-python] [AutoRes] service changed
      21:44:48.106 [e2-core] doing version filtering
      21:44:48.106 [e2-core] 0063: 02 03 08 07 00 00
      21:44:48.107 [e2-core] mask: ff ff ff 3f 00 00
      21:44:48.107 [e2-core] mode: 00 00 00 3e 00 00
      21:44:48.120 [e2-core] thread joined 0
      21:44:49.105 [e2-python] [AutoRes] determineContent
      21:44:49.373 [e2-python] action -> DirectionActions down
      21:44:49.605 [e2-python] action -> DirectionActions downUp
      21:44:49.605 [e2-python] unknown action DirectionActions/downUp! typo in keymap?
      21:44:49.855 [e2-python] action -> MsgBoxActions ok
      21:44:50.061 [e2-core] close frontend 0
      21:44:50.150 [e2-core] timeout 0012!
      21:44:50.621 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      21:44:50.763 [e2-python] [VTI HDMI-CEC] received cec message 87 from 0
      @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
      @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
      @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hgdo ()

    • ich habe mal einen anderen Ansatz gewählt: aus einem Bauchgefühl heraus (>20 Jahre Linux/Unix Admin) habe ich die Platte ersetzt. Vorher war eine 2TB Samsung Bj 2010 drin, jetzt eine neue 3TB WD Red. Nach 9 Stunden umkopieren (übers LAN, hatte gerade kein eSata Kabel bei der Hand) sind alle Aufnahmen wieder in der Box. Ein erster Test mit heftigem Vorwärts/Rückwärtsspringen in verschiedenen Aufnahmen ergab keine freezes mehr. Auffällig auch, dass das "gewohnte" "Loading", z.B. beim Öffnen der Aufnahmenliste, jetzt weg ist. Eigentlich ist ext4 ja recht robust, aber wer weiss.

      Ich bin verhalten optimistisch, dass das Problem damit gelöst ist.

      Schön wäre natürlich, wenn VTi in der Hinsicht etwas robuster wäre und bei Festplattenproblemen nicht komplett die ganze Box abschmieren lassen würde. Andererseits habe ich mitbekommen, dass es in letzter Zeit viel Veränderungen im Image gab wodurch wohl an der einen oder anderen Stelle ein paar Instabilitäten rein gekommen sein sollen. Vielleicht liest das ja der eine oder andere Entwickler und hat eine Idee wo man hinfassen könnte...

      Um Rückfragen zuvor zu kommen: nein - die SMART-Werte der alten Platte habe ich noch nicht ausgelesen.

      Update:

      Quellcode

      1. SMART Attributes Data Structure revision number: 16
      2. Vendor Specific SMART Attributes with Thresholds:
      3. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
      4. 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 591
      5. 2 Throughput_Performance -OS--K 252 252 000 - 0
      6. 3 Spin_Up_Time PO---K 060 060 025 - 12177
      7. 4 Start_Stop_Count -O--CK 097 097 000 - 3179
      8. 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
      9. 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
      10. 8 Seek_Time_Performance --S--K 252 252 015 - 0
      11. 9 Power_On_Hours -O--CK 100 100 000 - 30198
      12. 10 Spin_Retry_Count -O--CK 252 252 051 - 0
      13. 11 Calibration_Retry_Count -O--CK 252 252 000 - 0
      14. 12 Power_Cycle_Count -O--CK 100 100 000 - 84
      15. 191 G-Sense_Error_Rate -O---K 100 100 000 - 36
      16. 192 Power-Off_Retract_Count -O---K 252 252 000 - 0
      17. 194 Temperature_Celsius -O---- 064 049 000 - 34 (Min/Max 16/56)
      18. 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
      19. 196 Reallocated_Event_Count -O--CK 252 252 000 - 0
      20. 197 Current_Pending_Sector -O--CK 252 252 000 - 0
      21. 198 Offline_Uncorrectable ----CK 252 252 000 - 0
      22. 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
      23. 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 2
      24. 223 Load_Retry_Count -O--CK 252 252 000 - 0
      25. 225 Load_Cycle_Count -O--CK 089 089 000 - 117713
      26. ||||||_ K auto-keep
      27. |||||__ C event count
      28. ||||___ R error rate
      29. |||____ S speed/performance
      30. ||_____ O updated online
      31. |______ P prefailure warning
      Alles anzeigen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von sms ()